Member Contributer kostritzer Posted July 30, 2010 Member Contributer Share Posted July 30, 2010 Anyone have the following bare frames sitting around that they could give me some dimensions on? 5th/6th gen VFR RVT1000 (RC51) CBR600RR 03 and up Anything else that handles extremely well and is quite light! Looking for width between the frame spars, particularly interested in the RVT frame... Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Member Contributer sa1713 Posted July 30, 2010 Member Contributer Share Posted July 30, 2010 I have a 5th gen frame in my basement, but the extruded side frame has come off the stering stem area :cheerleader: Let me know what and where you need the measurements. Jim Quote Link to comment Share on other sites More sharing options...
Member Contributer kostritzer Posted July 31, 2010 Author Member Contributer Share Posted July 31, 2010 I have a 5th gen frame in my basement, but the extruded side frame has come off the stering stem area :blink: Let me know what and where you need the measurements. Jim I need the width between the two frame spars where the airbox and the rear cylinder head would normally reside. Trying to see if its possible to shove a 5th gen motor into an RC51 chassis! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.