Search the Community
Showing results for tags 'single nut conversion 5th gen'.
Hi, I have been looking into making a single nut conversion for the Honda VFR800, because I like the way that it cleans up the rear of the bike and allow me to use other wheels, from a Ducati or other single sided swingarm bike. I will do it on my VFR800 which is now being rebuild from a damaged bike, and taking form. more stuff is to be done to this bike:-) forks, rear end clocks(CBR1000RR) fairing for a CBR1000RR also, so many things are getting done. The single nut conversion I was thinking of doing like the RC45 HRC axle and nut with left hand thread M46 and with a nut the same as the RC45 HRC one with 56 mm socket. I have done it like BLS, Larry did on his RC45. Making an insert for the NC30/35 axle, press fitted and welded to the NC30 axle. On my bike I am using a NC30 axle, you can use a NC35 also. So if anybody else than me, is interested in this conversion, I took delivery this Saturday, of 8 sets of single nut conversions. It where cheaper for me to get all eight than just two sets for me and a friend. price for each set where 80 £ UK. Just the HRC RC45 nut is around 95 £ UK each from Honda. I have the threaded part for the axle and the 46 mm nut with left hand thread. Price is depending on whether you do your own axle or send one and I send one back to you finished ready for you to install. If anybody is interested in these give me a PM. I will also do a lightweight rear brake, as I have made for my RC45. It's using an ISR caliper and disc and my own holder.I will try to get some pictures up today. A few pictures are uploaded.