http://www.vfrdiscussion.com/uploads/1134969864/gallery_4338_691_71074.jpg[/img]
I wanted to open up the airbox lid to let more air in. I got the idea from a few folks on here but didn't see a post on it so here it is. If there already is one, delete this one.
I started by cutting the opening that is connected to the snorkel in half. then the side closest to the middle of the airbox I cut along the flat of the air box so that I could remove it. I then cut the flapper valve opening off as well. Then cut a square out of the top symmetrical with the half of the snorkel opening on the other side. Then by the use of epoxy, I affixed the cut off half to the side that I just cut out. Then used some abs plastic from a black trash can to fill in the holes. Final I sealed all the holes with some silicone sealant. I now will wait for the epoxy to cure for 24 hrs, then final sand and be done with it. It don't look too pretty but opened up the face of the box by about 400%. Now I will get to fiddle fart with the PCII to come up with a good map. Here are the pics.
border='0' alt='user posted image' />
S2400086.JPG
border='0' alt='user posted image' />
S2400084.JPG
border='0' alt='user posted image' />
S2400083.JPG
I plan to cover the opening with some form of chicken wire to keep the leaves out and large stuff. I will see how the epoxy dries, If it looks really bad, I may shoot it with some flat black paint to cover it up. Hope this makes sense to ya'll.