An9dy

Thanks for the guidance. Yes the problem was the plastic cup. The cup had the sensor spindle push through the plastic; hence the cup had slipped back along the spindle and disengaged from the sprocket nut. Solution: 3 or 4 small washer spacers behind the cup, on the spindle, moves the cup back to its normal position. Works fine now! Andy Sent from my SM-A310F using Tapatalk

Speedo needle fluctuates wildly! Generally it is reading very low. I know its electrical, but where do I start to try & fix it? This on a 1999 Fi-X with 50k miles. Andy Sent from my SM-A310F using Tapatalk