gmtech94

A very close match to that silver is Dodge trucks P7 code or P3 depending on the year . I have done a few parts and it is a very close match ,just always seems a little brighter because of new vs old colour . I hope this helps . 

I bought this about 2 years ago and have now finally got around to getting it ready for safety and a summer ahead .

Hi gmtech94,

Thank you for your donation of 25.00 USD. We look forward to improving the forums with your donation.

Thanks VFRDiscussion

Thanks Mello , How could I get one of these .?

I am going to order the Roadster Cycle fix . I have had a few of these bikes 5th and 6th gens and never had this problem but none with all led lights . That seems to be a problem . I have some heated grips to install but I am concerned that the original stator on this bike was really cooked after 8000 kms . I have gone over all the connections as there are no body parts on this bike so everything is in the open . Deoxit and make sure all is clean with a Qtip . Vfrness was installed before I got the bike . Voltage is stable but those wires sure get toasty about 140 degrees according to my thermal gun . While I am waiting for parts I will hook up my heated grips to see if that make a difference . Stay tuned .

Thanks to all for your help and advice .

Yes original Honda ones . I have 4 of them plus the original one , all produce a lot of heat on those 3 yellow wires .

I have several new OEM regulators and with the border shut down trying to get a moffset one might be difficult . All the brand new regulators have the same effect .

I have VFR madness 's bike and putting it back together after a few years . Replaced stator as it failed the drill with new oem one . New regulator and super clean connections ,bike has VFRness on it already . After reassembly the yellow stator wires get really hot . Voltage at rest 12.7 , idle 14.6 and at % k 14.8 volts . Unhook Vfrness and voltage goes up to 15.1 at idle and 5 k . It is a 2005 and only has 8000 kms on it ,stored inside most of its life and a new battery . I changed out the battery from my St1300 and have the same situation . Closed up crimps to see if the heat would go down ,no change . Not sure if it is important but all the lights on this bike have been swapped out for Led's  .Kinda stumped on what to do next ,any suggestions ?

Springs and shock have now been sold .

I have springs and a shock for you .

Fred and Lisa are awesome people I wish everyone a great trip and safe riding .

I alsao have a room booked but cannot attend this event so if anyone needs a room at the rocket please let me know otherwise I will cancel it .

I will also need to bail out of this event as my mom is in hospital and I need to stay around this part of the world for the summer and longer i hope .I have a room booked and if someone needs it please send me a pm so I can change it to your name .

Hi gmtech94,

Thank you for your donation of 50.00 USD. We look forward to improving the forums with your donation.

Thanks VFRDiscussion

Booked as of now .Really looking to get out and ride !

I am ready to go to either place .Let's ride .

Hi gmtech94,

Thank you for your donation of $25.00. We look forward to improving the forums with your donation.

Thanks VFRDiscussion

If I can get enough points for my kitchen pass can a ride a kawasaki borrowed from my nephew .

Some of you may want to look to the great white north ,your 70 cents will buy a canuck dollar which makes some of the machine work cheaper.

Didit if it works out for me to get out that way any chance of hooking up for the ride to nelson . I would enjoy riding with the 2 of you again .

I may be in for this one just checking for the kitchen pass . I will have to wait to figure out which bike I will bring and how . Trailer or ride out VFR needs to be put back together and run a bit before deciding.

I have ELKA's on both bikes and really like them ,spring rates seemed to be very good for me anyway .They are easy to set up and seem to work well right out of the box ,

Most collision shops have a digital camera that will transfer the colour through into a paint mix formula that will give a perfect match for any paint colour .

Put a small amount of tape on the end of the switch staft or a small amount of silicone let it dry then check

I will be in Vancouver at this time but I need to catch a big boat to take me and my bride to Alaska on a cruise . I wish maybe to skip the cruise and ride but the dog house is not very comfy so I best not even suggest it. Take care all of you and have a safe ride ,sounds like it will be fun .