I decided to change the cam chains on my vfr , after chaining them perfection and then setting up the timing correctly as per manual , initially the front two cyclinders dint fire up , later I cleaned all sockets and few sensors sockets , then bike fired up all cylinders but then the compression seem to be a low on front cylinders, the bike was perfect before I decided the change the cam chains .... I need help thank you
Question
Mahi
I decided to change the cam chains on my vfr , after chaining them perfection and then setting up the timing correctly as per manual , initially the front two cyclinders dint fire up , later I cleaned all sockets and few sensors sockets , then bike fired up all cylinders but then the compression seem to be a low on front cylinders, the bike was perfect before I decided the change the cam chains .... I need help thank you
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.