mvvette97 0 Report post Posted Wednesday at 01:30 AM Just wondering what you guys are using for the setting on the accel pump on the power commander 5? I have been playing around with it but am not really sure what setting to go with. Just for fun I set the sensitivity to 65 and 30 rev and 15% enrichment. I'm taking the bike to the strip this coming weekend and have been doing a little test runs and it seemed to bog just a little off the line with the accel pump not activated. Just took it for a test again with the pump settings listed above and it really helped the off line bog. But from what I have seen on the web most people are running the sensitivity 80 or 90. What do you guys run for settings? Thanks Share this post Link to post Share on other sites
