RCDekker Posted March 25, 2013 Share Posted March 25, 2013 I'm going to do the same thing this winter. I've blast my main fuse 3 times already because of poor connections. So november, my revival season will start.Best of luck and it looks awesome. Quote Link to comment Share on other sites More sharing options...
alexandervf Posted March 25, 2013 Author Share Posted March 25, 2013 I'm going to do the same thing this winter. I've blast my main fuse 3 times already because of poor connections. So november, my revival season will start. Best of luck and it looks awesome. Good luck with your project on november Rcdekker. If you like this kind of job, you will have a good time and you will also have an outstanding outcome. Thanks Quote Link to comment Share on other sites More sharing options...
Guest palmowen Posted March 28, 2013 Share Posted March 28, 2013 Oh it is a great job ! I just got 1995 RVF400 and I want to rebuild it too. Can you list the model of the connectors and the quantities ? And Where can I order from the web ? Thanks a lot ! Quote Link to comment Share on other sites More sharing options...
alexandervf Posted March 28, 2013 Author Share Posted March 28, 2013 I bought all the connectors from eastern beaver. You will be needing : Most of the connectors are under this category, see the link below. (all these connectors are sealed type and are expensive. You can choose non sealed if you want to go cheaper at the .090 inch pin size http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/sealed.html 1x 4 pin male and female (.090 inch) 2x 9 pin male and female (.090 inch) 1x 2 pin female 2p250L (.250 inch) 1x 6 pin 6p250cna for your R/R (.250 inch) 1x 2 pin male and female (.090 inch) 1x 8 pin male and female (.090 inch) 2x 3 pin male and female (.090 inch) 2x 3 pin male and female 3p250-cna (.250 inch) Fuse box terminals as many as you want H4 socket 2 or more (.312/.305 inch) It is best for you in order to avoid double orders to buy one of each plug more as a spare ...just in case. Also you will be needing : B-48's and B-49's as many as you can buy 30 or more of each. They are VERY useful because you will have to join cables like your original harness is. If you decide to use the SH series of REG/REC you will be needing the 6p250-cna plug. If you decide to use the FH series of REG/REC you will be needing the Furukawa QLW .250” Connectors. That's most of it. Quote Link to comment Share on other sites More sharing options...
Guest palmowen Posted March 28, 2013 Share Posted March 28, 2013 Oh Thanks a lot !!! I'm going to check it thanks again. ^^ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.