KyleMC16 Posted March 30 Share Posted March 30 Hello, I am offering my services in the repair of the 3rd and 4th gen VFR's petcock. As many of the owners of these fantastic bikes know the petcock faceplate is riveted onto the body. And can not be removed without machining the rivets down and then drilling and tapping to allow the faceplate to be installed back on with screws. Trust me when I say it is extremely nerve-racking to perform this as if you go just slightly off-center, you may damage the body irreparably. And that's where I come in. I have repaired both of the petcocks that I own. The one on my 96 VFR750F, and the one I bought as a backup for when the original started leaking. and now I am offering my service to you as I have acquired all the necessary tools and materials needed for the repair. And for 60 USD plus shipping both ways I will machine, drill, and tap the body of the petcock to accept M3x.5 mm screws, I will also replace all of the seals in the petcock so it will function like the day it came off the manufactures plant. If you are interested in this please feel free to contact me here or at my email address: KyleMcNair17@GMail.com Link to comment Share on other sites More sharing options...
Recommended Posts