.jpg.86e12cdc3ba78fc4845c57f570e77371.jpg)
Maccers
-
Posts
17 -
Joined
-
Last visited
Content Type
Forums
Profiles
Gallery
Blogs
Downloads
Events
Everything posted by Maccers
-
Hi, nope, the shop that done the front rebuild and supplied the rear shock will be doing this very soon. I stripped it all and re-built the bike while carrying out other bits and bobs while the bike was naked. I did notice the previous owner had dropped the front by 5mm as when I re-assembled the front end, I set the 30mm gap from the top of the fork tube to the clamp but it didnt match my initial measurement before stripping.
-
I just replaced my rear shock with a Nitron R1 shock, had the fronts re-built too. All put back together now, few hundred miles later all good. One thing I did notice was the bike leans over a tad more than it used to, and also my son who I regularly take on the back mentioned it seemed he was higher. The new shock I am sure is exactly the same length as the old one. Just wander what changed?!
.thumb.jpg.b1b63e2ad46e9d5613a02348981b4273.jpg)