This is Randy from Knight Design LLC. I make the pegs that are shown in this link. So far about half of the Pegs I make for Buells are actually used on other makes and models of bikes. I can just as easily produce these same pegs to fit on a VFR, so that you won't have to buy a pair of pegs and then mod them yourself. I would just need someone to send me the vital dimensions of the pivot pin diameter, the distance from center(or front or rear) of the pivot hole to the rear of the peg, and the outside dimensions of the pivot forks( how much room is there between the top and bottom mounting tabs. I would be willing to make the first protype pair or Buell like drop pegs for no charge to anyone that would want to work with me on getting a pair of pegs made, and then actually trial fitted to ensure they fit and work properly. I have done this for other models of bikes and it has worked well. May need a stock peg if getting exact dimensions is not your thing. I can go either way. The pegs can be wide, as the Ulysesses pegs are that I produce, are more the the XB peg width.
Anyway since I have seen than many have followed this link to my Ebay postings, I thought I would mention to this group that I can make the pegs to fit your bikes also.
If anyone is interested, or just wants more information, email me at randyk@knightdesignllc.com
Randy
Randy
You may have just offered a solution that many of us would jump on. Keep in touch!!!
Muff
Outstanding, any chance someone that has already done a swap can donate their pegs for development here ?
Man ... no bike yet and I am already jumping into 2 mod threads ... here we go again ! :blush: