Winter cooling improvement project
Hi there people, an image is worth a thousand words so here it goes two thousand words:
This is what i came up with, now i'm thinking about taking it to a welding shop to accomodate a pair of tabs and cut this tubing to match a bigger one that is oriented properly to plug into each side rad.
I feel like this could end with the cooling problems we have on traffic jams during summer (even if we all know that the hotter the viffer the better it runs)
So i've come up with this and i'll try t
RC51 oil cooler install complete!
This is what I got from the breakers - grubby with seriously bent fins and a few harder bashes.
Washed in the sink with soap and lemon household cleaner (don’t leave it on too long). Toothbrush for gentle cleaning.
Used tweezers and flat screwdrivers to straighten fins. Took 3 hours in front of telly!
There were some bits beyond repair but you’ll agree it looks much better.