Tail-tidy Installation Guide
Step 1:
Using an Allen key, loosen & remove the bolt from each side as shown in the red circle in Picture 1.
u
Picture 1: Attachment bolt location / Mudguard side piece
Picture 2: Threaded plate & plastic surround
Important: When turning the Allen key, check the threaded plate shown in Picture 2;- if you see it rotating more than a few degrees, do n
Tail-tidy Installation Guide
Step 1:
Using an Allen key, loosen & remove the bolt from each side as shown in the red circle in Picture 1.
u
Picture 1: Attachment bolt location / Mudguard side piece
Picture 2: Threaded plate & plastic surround
Important: When turning the Allen key, check the threaded plate shown in Picture 2;- if you see it rotating more than a few degrees, do n