Search the Community
Showing results for tags 'tire'.
Found 1 result
So I am no Rossi, but I do ride at a pretty good pace through the turns. I feel that I push pretty hard while still being with in reason. Anyways, going over my bike the other day and I am looking at my tires. My rear shows that I have used it all the way to the last mm of the edge to the sidewall. But looking at the front shows that I have plenty left, more like a centimeter left. So to cut to the chase, I am wondering if I need to adjust something. I have the rear at the standard height and the front lowered about a half of an inch. I wonder if maybe I should raise the rear some or increase the tire pressure in the rear etc... I had both the front and rear at 32 psi last time I checked. One thing that I have noticed after dropping a lot of weight off of the bike is the rear feels pretty harsh. I weigh only about 165 fully geared and I have pulled a lot of weight off of the bike. I know a lot of people say that the bike is under sprung from the factory, but I feel at this point that my front spring rate is about right and my rear spring rate might be a little high. My front preload is one line out from full stiff and has fresh honda pro oils in it per you guys advice. My rear is at full soft and I am not really sure about the rebound, I cant seem to find a good spot. I think I may just need a new shock, as I am sure that they get cooked with there location to the rear exhaust primaries... My bike is a 2007 with 46,000 miles. Hoping to hear back.