Jump to content

2FAST4U

Member Contributer
  • Posts

    559
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by 2FAST4U

  1. Hi Mohawk, Thank you for your donation of 25.00 USD. We look forward to improving the forums with your donation. Thanks VFRDiscussion
  2. I don't have time to read six pages of posts but when I saw the title to this thread, it immediately made me think of an incident that happened a few years ago in the midwest. A police helicopter claims to have "timed" a guy on an RC51 going over 200 mph. The RC51 was bone stock except for slip-ons. The guy on the bike insisted he was maxed out at 160 mph but the police wouldn't budge from their "calculation." The incident ignited a firestorm of responses from motorcyclists like ourselves that insisted there's no way on earth an RC51 can reach 200 mph. Absolutely no way. Even the editors of major motorcycle publications came out and said that, while going 160 mph on a public road is stupid, unless the RC51 was turbocharged (it wasn't), there's no way that bike can get even close to 200 mph. The cop said he was counting the mile markers on the highway and looking at his watch and calculated the motorcyclist's speed at over 200 mph. He insisted he was right. When the police officer was confronted with insurmountable evidence to the contrary, as expected, he refused to admit he was wrong.
  3. 2FAST4U

    Loose Livestock!

    I'll touch base with you when I get there. I don't know how long I'll be there so no need for a house. I may be there a week, a month, or a lifetime. I'm trying very, very hard to stop relocating.
  4. 2FAST4U

    Loose Livestock!

    I actually think I've been on that road. I'm relocating to Austin next week, so who knows, we might see each other riding around!
  5. I'm going by the universally accepted (and published) compression ratio. For the current CBR1000RR, it's 12.3:1. On my bike, it's 11.6:1.
  6. Your bike's compression ratio is 12:1 (which is already high). If you're serious about having some even higher compression pistons installed, as well as porting and polishing the heads, and having somebody grind you some hotter cams, you're probably going to need a full exhaust, a reflashed ECU, and intake work done as well. I seriously doubt you'll find someone (especially where you live) that has the ability to do that kind of work on a VFR1200 DCT. You may want to start looking for another bike.
  7. 2FAST4U

    PEI Vaca 036

    Never mind. Your profile says you've got a 6th gen. and that's a 5th gen. in the photo. I take it you borrowed it from someone.
  8. 2FAST4U

    PEI Vaca 036

    OK, since nobody's asked, I will. How did you get from Hawaii to Prince Edward Island on a motorcycle?
  9. Note to Seb: Not trying to hijack this thread but with your fabrication skills, you ought to consider coming up with a new headlight for the VFR1200F. It's the one part of the bike a lot of people just can't get past. Maybe you can have somebody send you their headlight so you can make a mold out of it. Once you've got something to work with, you can come up with a custom headlight design. You can even get ideas/input from members on various worldwide (e.g. British, German, etc.) VFR forums.
  10. Although I don't have the link, I remember it was an Englishman on the British (or European) VFR forum that did it. If memory serves, what made the job more difficult than he anticipated was that many connectors (e.g. electrical, cooling system, etc.) didn't match up (he still got the whole thing to work, though.) Although he spent a lot of time on the project, I don't recall him saying it cost him a fortune. Best of luck to you.
  11. I own that bike but can't answer your question because Seb did the work Maybe he'll chime in shortly and help you out. He lives in upstate New York so getting him to do job probably won't happen (I lived in Philadelphia eight years and rode up there.) I would not have attempted this mod on my own. No way.
  12. This is a '96 (Fourth Gen.) VFR750 with '03-'04 CBR600RR fairings (excluding the rear cowl -that's a Sixth Gen ['02-'09] VFR800 subframe and cowl.) You're gonna have to put a lot of work into fabbing mounting brackets because the CBR fairings aren't even close to being direct bolt-ons. Ditto for the subframe. Best of luck to you.
  13. Since you're good with electronics, you ought to build 'em and sell 'em here. On another note, do you still have 6th gen. HID kits available?
  14. Somebody posted this link on another forum. If it's a re-post, feel free to delete. http://www.kawiforums.com/how-tos-faqs/121549-diy-chain-rivet-tool.html
  15. I agree with both of these guys: Silverstar bulbs don't last long. Forum member Tightwad recently came out with an HID kit for the 6th gen. VFR. You may want to look into it.
  16. Just an FYI: that's not a visor nor a screen. It's a shield. A visor is like what you see on baseball caps. Many 3/4 cruiser helmets have small ones (off-road motorcycle helmets have them, too.) Screens are what you have on the front of your bike, i.e. a wind screen. The Russian guy is right. If you're having trouble getting a scratch out, you're better off buying a new one than to keep spending time and money on it. Better helmets (like my AGV and Suomy) come with scratch-resistant shields. If your helmet didn't come with a scratch-resistant shield, see if they make one for your helmet and just spend the $45 or so on one. Motorcycling is dangerous as it is. The last thing you want are scratches on your shield distracting (or worse, obstructing) your view. Better shields are likely to be fog-resistant as well.
  17. Good job. Now how about a matching front wheel?? Seriously, I've always thought a size 190 tire would look better than a 180. The CBR1k has a 190 and is a smaller bike.
  18. I've got an 8-spoke rear wheel that's been sitting here for months. The problem is if I get it powder coated, I'm gonna have to powder coat the front wheel to match. Then I'm gonna want to powder coat the front brake carriers. Then I'm gonna need fresh rubber. Now that I'd have such good looking wheels, I'm gonna want to repaint the entire bike. :sad:
  19. For starters, good job (as usual.) I don't know whether I just now noticed it or I forgot: The bike's got handlebars?! Out of curiosity, have you ever tried to put another bike's bodywork on a 6th gen. VFR? I would think an RC51 would be a good place to start (and since you once owned both bikes, maybe you tried it.)
  20. Here's a Z1000 with a ZX-10R front end (forks, fender, and wheel) and a VFR SSSA. The rear wheel is an automotive aftermarket wheel. The guy that built this said it was.
  21. Some car wheels will actually do the trick. I couldn't find the thread but there was once a thread (that I actually started) about a guy whose Z1000 had a ZX-10R front end and a VFR SSSA. I forget what kind of rear rim he used but it was an aftermarket car rim. It looked sick. It just so happened to have the correct offset, number of lugs, lug pattern, diameter, and width for his 190 tire (it may have even been a 180 like ours.)
  22. Maybe this link will give you some ideas on lightening a bike. Someone posted it on the local forum. http://www.ducati.ms/forums/showthread.php?t=76500
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.