VFRwhisp

Please post up if you are fairly certain you are in. 1. Choco 2. Axel_7 3. DfnsMn69 4. jimbob 5. MaxSwell 6. Willy 7. Veefer800Canuck 8. jviffer 9. Didit 1. Choco 2. Axel_7 3. DfnsMn69 4. jimbob 5. MaxSwell 6. Willy 7. Veefer800Canuck 8. jviffer 9. Didit 10. VFRWhisp I will be marking this on the work calendar. Cant wait to see you folks again! can we get an updated list. It looks like not all have copied/pasted the point list correctly.

great info, just changed my pads too.

I have the Knock offs sold by The2Wheels on fleebay. I have no complaints and my clutch level survived a tip over in my driveway.

I use an NEP cruise control CC-3 for Dual cable Honda. Cost me $17 and I can turn it off. with an O-ring your always going to need to twist the throttle off, and that is going to get old very fast in traffic.

I think I may have stumbled on a solution to the 65k Gates wants for a custom mold. You need to think globally here. Produce all the engineer drawings needed for machining the parts. include the design for molded polycarbonate 166t belt. Slap some fake U.S. Paten numbers on them and leak them to the Chinese. Then you just purchase the whole kit on E-bay in a few months for $200 ready to fit your bike. :)

This post was great back in July 07, but since then hasn't the factory totally made up for it with the safety recall and free fix or replacement? If your bike hasn't been fixed by now by the dealer, don't waste your time doing it on your own. Get the to nearest dealer and have it fixed for free. Edit: I should add that if your not aware of any repair relevant to the recall have been made, you can look for the punch mark near the VIN on the right side of the frame. If the dealer has done the fix, they are required to make a punch mark 10mm below and 10mm left of the letter J.