Hey all, I've got a 1994 VFR that during a short day trip a few years back, suddenly died. I had already purchased a VFRNess and new regulator, so I went ahead and installed them. I found that the Main fuse had blown as well. I replaced the main fuse, and every time that I would go to try to start the bike, it would blow again. I swapped back to the original regulator, and there was no change. I let it sit for another year, and was able to get the starter to turn over for about 10 seconds this time, before again blowing the main fuse. I went through all of the wiring on the vfrness and ensured that all connections were good, however I am now at a loss as to what could be causing this fuse to blow. 99% of the time, it will blow at the press of the starter button. I should also note that the battery has been changed out for a fresh one as well.
I'm interested in how you got that license plate bracket to mount on your vfr. Or if you fabricated your own.