VFR750F3

I ride a RRR electronic suspension is amazing and super comfortable. I am 55 BTW. I own several bikes with upgraded suspension, but nothing compares to it. Still love my RC51 VFR800 and 750's though.

Some k&n filter area is smaller

I am not sure why everyone is so worried about the size and filtration of their air filters. My modified RC51 uses a tiny foam air filer which was also used on other aftermarket airboxes.

The spacing is correct. Mirrors afterwards have a different spacing and a wider mounting surface for example my CBR1000RR-R w integrated turn signals which I tried. I wanted integrated ones but I wanted the stock look. Also mounting these extend your mirrors without having to purchase mirror extenders.

I went with the Pipercross. Easier to clean and oil in my opinion.

amazon

I am gonna have to re-shim again. I am a little bit off.

Not my intent for visibility nevertheless they are bright. I only purchased due to removing front turn signals and installing projector headlights.

Had to drill a hole through the opposite side where the wire runs through because I flipped it so the mirror base fits perfectly.

Finally put the wheel on. 5mm taken off the OZ spacer on left side of wheel. Used stock spacer machine down to approximately 6mm from 10mm to take up slack on the right side. Left caliper spaced out 4mm while the right at 6mm, No drag on the rotors. Will try some other spacers for the calipers once it warm up and I torque down the axle and get some new brake pads. Deciding between Brembo and Honda pads.

Finally received the front wheel from OZ. I have to reduce the left spacer by 5mm to center the wheel and then shim the calipers 5mm outwards and use longer bolts 8x40. The rim is from a 2007 up CBR600RR 20mm axle. Brembo Oro Rotors are also new.

I have a set of wheels from my 02 if you interested. I am just waiting for my new OZ front wheel.

BEST OFFER WILL SEPARATE

$150.00 SHIPPED PAYPAL ACCEPTED BUYER PAY FEES.

Hardly used upgraded to Ducati Hub. $100 shipped. PayPal buyer pays fees.

The CBR900RR front is very short. I have it on my 1986 VFR750F. See my photo gallery. Just get some Andreani fork cartridges if you want improved handling etc.

No need to go larger than a 180. If you want a larger tire all you have to do is research which 180 is the widest. Not all tires are made the same. Go with a 60 profile instead of a 55 if you want to improve handling. 5.5 wheel can handle a 190 but you have to verify with the manufacture.

My bad I thought you meant lowering link. Check amazon they are like 27 bucks.

https://offerup.com/item/detail/2fccd2df-521c-3006-83ec-b9172ae4665b?q=vfr800 Is this what you are looking for.

https://www.aliexpress.us/item/3256802908101005.html?spm=a2g0o.productlist.main.25.61842d8cB2P1v2&algo_pvid=f019e7ab-7176-48a0-a711-d74d7ab41c48&algo_exp_id=f019e7ab-7176-48a0-a711-d74d7ab41c48-12&pdp_npi=4%40dis!USD!31.49!25.19!!!230.00!!%402101e9d216944809056183444e8699!12000024049501491!sea!US!3110917860!S&curPageLogUid=toUqGRcqgmBR

The fairings are Chinese knockoffs. I asked the seller to make them without the headlights. I do not ride this bike or my other bikes on the street or at night for that matter. I used to go to the track with it and go around the neighborhood. I pretty much ride my RRR. My 1986 VFR750F has RC45 body bodywork with yellow fog projectors that I used to ride at night. People could see me from miles away, Cops used to tell me I was supposed to have white lights and I told them show me law. I am currently playing around with some Nissin Versa fog light for the 86 right now.

more pics hard to do on the phone

Pretty much done finally got around to finishing it. Still need to to torque nuts to 170 ft/lbs. I got it to 150 A friend will help me. I kept original master cylinder. Replaced the large nuts with black ones also also titanium lock nuts and safety circlips. Wheelbase will be adjusted ie chain a little loose. See how close tire is to exhaust. Will order front matching soon. Still deciding on calipers.

Cool thank you for the response. If you are ever in Chicago look me up.

I was too lazy to drill another hole also. Nevertheless I found some article that it is normal for the bracket to move. The VFR800 setup is fixed while the 1098 setup has slack built into it. If you go on the Extreme creation site their setup has slack built into it with no stopper. Seb do you think it is beneficial to use it? Thank you for the welcome.