TurdEngineer99

Any of you guys planning on a similar Catskills ride this fall?

Had this problem myself...

Go to your local HD or hardware store and buy a gutter guard - it's the expanded metal wire type (aluminum) that you would insert into the downpipe openings of your gutters. Unroll it, cut what you need to fit over the air inlets in the air box cover, use some sheet metal screws to fasten it in place and your good to go.

Well, 10 years old battery (orig.) bit the dust so set off in search of a new. The Yuasa is $180 at cyclegear, and i dont even want to know what a stealer charges. My search for a 12S leaves me empty handed, only to find the 12BS which is taller and will not fit under the seat. Sears had the Craftsman 9S which has identical dimensions to the 12S but the A-hr rating is 9 vs 12. So I went with it for $80. Before I add the mix and charge it, and knowing if I use it that cold weather starts will be taxing on this battery, does anyone recommend that I not use this battery in lieu of the 12S? Also, if I do use it, will the added load 'hurt' the RR & charging system?

On engines, it's a must to have as good a ground as close as possible to the piece being welded! Otherwise, the current from the welder will arc across the main bearing sufaces if the ground is not adjacent.

As for stuck exh. studs, nuts, etc, it helps to tighten it just a tad prior to loosening. Sometimes a pair of vice grips will do the trick too.

Thanks for the tip~