Polyian Posted October 17, 2021 Author Share Posted October 17, 2021 I really appreciate all the help being offered. I think I would like to start with Genmars, being the easiest approach....if I can get some...thanks guys Link to comment Share on other sites More sharing options...
Member Contributer jefferson Posted October 17, 2021 Member Contributer Share Posted October 17, 2021 On 10/15/2021 at 6:50 PM, Polyian said: I noticed no clock, what are the other options I do have? I’m just learning about what I bought on a whim. You have the center stand and the fairing on the side stand. Link to comment Share on other sites More sharing options...
3rdgenred Posted January 4, 2022 Share Posted January 4, 2022 Pm’d i finally found the risers. They are 1” Link to comment Share on other sites More sharing options...
Polyian Posted January 5, 2022 Author Share Posted January 5, 2022 6 hours ago, 3rdgenred said: Pm’d i finally found the risers. They are 1” Great, I think that’s normal rise. I’m currently in Corning Ca headed for Palm Springs…you could ship there if we agree on a price. Easier than shipping to Canada. Do you have a pic? let me know and thanks…. Ian Link to comment Share on other sites More sharing options...
3rdgenred Posted January 5, 2022 Share Posted January 5, 2022 Link to comment Share on other sites More sharing options...
Polyian Posted January 5, 2022 Author Share Posted January 5, 2022 Look good, do you have the insert pieces? will they work without the centre inserts? I have never used these before so it’s all new to me. Link to comment Share on other sites More sharing options...
3rdgenred Posted January 5, 2022 Share Posted January 5, 2022 Lol they literally go beneath your current clipons. Unbolt, remove, place these stud side down, in your top triple, plop your clip ons down onto them, tighten clip ons. 10 maybe 20 minutes? Not quite an inch. Possibly 22-ish mm Link to comment Share on other sites More sharing options...
3rdgenred Posted January 5, 2022 Share Posted January 5, 2022 … Or you could just sell me your bike and I’ll put it next to the others here. No doubt you saw the ones from moto cnc on ebay if you’re talking about caps. I have never seen the caps 🌊 Link to comment Share on other sites More sharing options...
Polyian Posted January 5, 2022 Author Share Posted January 5, 2022 54 minutes ago, 3rdgenred said: … Or you could just sell me your bike and I’ll put it next to the others here. No doubt you saw the ones from moto cnc on ebay if you’re talking about caps. I have never seen the caps 🌊 I guess if you never saw the caps they are not needed for anything but aesthetic’s Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted January 6, 2022 Member Contributer Share Posted January 6, 2022 I had a set of Genmars one time, and IIRC the caps were press-fit chrome-plated steel, which eventually rusted. IMHO, a rubber cap or blank grommet would probably look (and function) better... Ciao, JZH Link to comment Share on other sites More sharing options...
Polyian Posted January 6, 2022 Author Share Posted January 6, 2022 2 hours ago, JZH said: I had a set of Genmars one time, and IIRC the caps were press-fit chrome-plated steel, which eventually rusted. IMHO, a rubber cap or blank grommet would probably look (and function) better... Ciao, JZH Thanks Link to comment Share on other sites More sharing options...
3rdgenred Posted January 11, 2022 Share Posted January 11, 2022 SENT TODAY MAH FRIEND Link to comment Share on other sites More sharing options...
Polyian Posted January 11, 2022 Author Share Posted January 11, 2022 37 minutes ago, 3rdgenred said: SENT TODAY MAH FRIEND Thank you kindly, I’ll watch for the package …Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.