Mic Posted August 22, 2021 Share Posted August 22, 2021 I'm new to the group, can anybody help with where l can get a new or second hand LED Sreen for 98 to 2001 rc46 VFR800. Thanks Mike Hall Queensland Australia. Quote Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted August 22, 2021 Member Contributer Share Posted August 22, 2021 8 hours ago, Mic said: I'm new to the group, can anybody help with where l can get a new or second hand LED Sreen for 98 to 2001 rc46 VFR800. Thanks Mike Hall Queensland Australia. Hi Mike. Assume you mean the LCD. Before replacing this. Have you confirmed that all the mounting screws for the LCD are clean and making good contact with the PCB copper track pads? Have you gone over each copper pad with a multimeter on low ohms or buzzer mode to confirm each copper pad for the LCD has continuity back to either of the two main incoming connectors? Corrosion and broken copper tracks at the back of the Instrument Panel are a common cause of LCD and indicator light issues. The tracks can easily be repaired by soldering shorting wires. Attached is a repair example, the red wire is bypassing the open circuit copper track shown with the two red circles. Quote Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted September 4, 2021 Member Contributer Share Posted September 4, 2021 I think the LCD screen component stores the odometer reading, FYI, so that would change with a new/old unit. Ciao, JZH Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.