Jump to content

Fork oil amount or level from top of fork?


doubled

Recommended Posts

  • Member Contributer

I installed a set of Race Tech springs yesterday and ran into an issue.  After emptying the old oil and flushing with a solvent, I then filled the slider, fully compressed, spring out, with the recommended max fluid amount - 457cc.  Then the manual says the fluid should be 130 mm from the top of the fork.  It wasn’t so I had to add another 45cc to get it to 130 from the top.
What’s right? The amount of fluid or distance from the top?

Link to comment
Share on other sites

  • Member Contributer

Yep, height.  But make sure you have cycled the fork a few times to distribute the oil before setting final level.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.