Ejphotos Posted September 25, 2021 Share Posted September 25, 2021 Great job on this bike! Link to comment Share on other sites More sharing options...
Member Contributer adkfinn Posted January 6, 2022 Member Contributer Share Posted January 6, 2022 Nice work. These bikes are such under-appreciated jewels (even after the great 'rona bump in bike prices). Great design and well put together, which makes maintenance enjoyable and riding even more so. Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted January 7, 2022 Member Contributer Share Posted January 7, 2022 Well done, great thread and photos too. I had a set of Staintunes on my 6th Gen and loved the sound. I'm taking more of an interest in the 5th Gen threads, esp ones like this, as I am hoping to purchase an 01 model soon and spruce it up a little, much as the OP has. Link to comment Share on other sites More sharing options...
Member Contributer vfrcapn Posted January 7, 2022 Member Contributer Share Posted January 7, 2022 Great looking bike, looks like new, like mine 20 years ago. I had the same 'stang back in the day too, although not to the state of tune that one looks to be. Link to comment Share on other sites More sharing options...
jroberts427 Posted January 7, 2022 Author Share Posted January 7, 2022 1 minute ago, vfrcapn said: Great looking bike, looks like new, like mine 20 years ago. I had the same 'stang back in the day too, although not to the state of tune that one looks to be. Thanks, good eye! The 5.0 has it's own story. I bought it the first time in 2002, sold it in 2007 then found it again (my actual car!) and bought it back in Dec 2018. It was a total basket case and had 350k miles on it. My family and I spent 14 months doing our version of a full resto-mod. Body, paint, brakes, suspension, interior, fully rebuilt drivetrain, all in my garage. It runs well and dynoed 263hp/302tq at the wheels which is a nice improvement over stock. Thinking I might go single turbo at some point in the future. Our local news station even did an article on it: https://www.ksl.com/article/46782464/after-more-than-a-decade-saratoga-springs-family-finds-their-mustang-that-got-away Cheers, Justin Link to comment Share on other sites More sharing options...
Member Contributer bmart Posted January 7, 2022 Member Contributer Share Posted January 7, 2022 Lovely. I miss my 5.0. Link to comment Share on other sites More sharing options...
jroberts427 Posted January 7, 2022 Author Share Posted January 7, 2022 2 minutes ago, bmart said: Lovely. I miss my 5.0. Great minds think alike! Looks clean! Justin Link to comment Share on other sites More sharing options...
Member Contributer vfrcapn Posted January 7, 2022 Member Contributer Share Posted January 7, 2022 5 minutes ago, jroberts427 said: Thanks, good eye! The 5.0 has it's own story. I bought it the first time in 2002, sold it in 2007 then found it again (my actual car!) and bought it back in Dec 2018. It was a total basket case and had 350k miles on it. My family and I spent 14 months doing our version of a full resto-mod. Body, paint, brakes, suspension, interior, fully rebuilt drivetrain, all in my garage. It runs well and dynoed 263hp/302tq at the wheels which is a nice improvement over stock. Thinking I might go single turbo at some point in the future. Our local news station even did an article on it: https://www.ksl.com/article/46782464/after-more-than-a-decade-saratoga-springs-family-finds-their-mustang-that-got-away Cheers, Justin Nice work, that looks as clean as the VFR. I put 200K on a '79 Capri 5.0, then a few more years on a '86 Mustang LX 5.0. Fun cars. Link to comment Share on other sites More sharing options...
Member Contributer RC1237V Posted January 8, 2022 Member Contributer Share Posted January 8, 2022 This thread really shows how a decent low-mileage bike can still need a lot of work to make it "up to date" on maintenance. If you took it to a shop, all that work would have been well over $1,000 especially with a new set of tires! If I ever grab a 5th or 6th gen, I will keep that in mind Link to comment Share on other sites More sharing options...
NS31 Posted February 26, 2022 Share Posted February 26, 2022 Great bike and job. My 2 cents: I would do the extra little thing I did after buying my beloved 🙂 yellow 1999 back in July => go for lithium battery. Its a real easy 3.4kg weight gain you can actually feel especially - but not only- when moving your bike manually being on the side. I went for a SHIDO LTX12-BS LION -S bought on Amazon for 81€. After 6 months, so far so good, even with temp as low as minus 2 Celcius. Requires a specific charger (mine was already lithium compliant by chance). Link to comment Share on other sites More sharing options...
Member Contributer stuartb3502 Posted March 5, 2022 Member Contributer Share Posted March 5, 2022 Lovely looking bike and write up. Any chance of reaping the video of the Staintunes? Would like to get a high level silencer in mine and always heard these were one of the best even if now hard to come by. Link to comment Share on other sites More sharing options...
Member Contributer Jelorian Posted March 8, 2022 Member Contributer Share Posted March 8, 2022 Great write up. I also have an 01 that has low miles and is in similar condition. Did all the maintenance to get her where I wanted her to be including valves and she is good to go. The only thing I want to do now is get a Staintune high mount. Hopefully they will start making the new ones soon. Link to comment Share on other sites More sharing options...
Member Contributer raYzerman Posted March 8, 2022 Member Contributer Share Posted March 8, 2022 Might I suggest a Delkevic high mount instead? Link to comment Share on other sites More sharing options...
jroberts427 Posted March 8, 2022 Author Share Posted March 8, 2022 On 3/5/2022 at 11:20 AM, stuartb3502 said: Lovely looking bike and write up. Any chance of reaping the video of the Staintunes? Would like to get a high level silencer in mine and always heard these were one of the best even if now hard to come by. Here you go. It's a cold start with some revs after I let it warm up a bit. Link to comment Share on other sites More sharing options...
Member Contributer stuartb3502 Posted March 9, 2022 Member Contributer Share Posted March 9, 2022 Thank-you. Sounds brilliant and the bike looks outstanding. Link to comment Share on other sites More sharing options...
jroberts427 Posted April 16, 2022 Author Share Posted April 16, 2022 Went for a ride the other night and noticed one of the dash lights had burned out. Great time to upgrade to LEDs! I read some forum posts on the topic and found some suitable LEDs on Amazon. They were priced well and are slightly lower wattage than the stockers: https://www.amazon.com/dp/B08229N2Y5?psc=1&ref=ppx_yo2ov_dt_b_product_details The package of 10 gives enough to do the main lights on the VFR and 5 for use on my 1992 Mustang which I'll install soon. Here's the LED compared to the stock bulb: Everything came off easily, just take your time and keep track of the fasteners. I learned as well that you don't have to remove the blinkers, nor do you have to disconnect the blinker plugs or the headlight plugs. I just placed a microfiber on the front fender and let the nose fairing rest on that. From there I removed the 3 10mm nuts securing the gauge cluster. It is then easily pushed forward to access the dash bulbs. The LEDs fit just fine and had no issue with polarity. Everything went without a hitch. With the LEDs installed I turned the key to verify all looked good before reassembly. Took a few minutes to clean things up a bit and put it all back together. I was pleased not to have any left over fasteners, bonus! And now for the before and after: For just a little time and even less money I am very pleased with the result. Still need to go for a night ride to see how they look in the wild. Cheers, Justin Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted April 16, 2022 Member Contributer Share Posted April 16, 2022 Nice job Justin. Just wondering, how does your Fi Light perform with the LED insert? Others that have installed an LED to the Fi light have noticed it constantly dimly lit. ECM provides the ground side for the light electronically and may require the similar loading effect of an incandescent globe. Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted April 16, 2022 Member Contributer Share Posted April 16, 2022 2 hours ago, Grum said: Nice job Justin. Just wondering, how does your Fi Light perform with the LED insert? Others that have installed an LED to the Fi light have noticed it constantly dimly lit. ECM provides the ground side for the light electronically and may require the similar loading effect of an incandescent globe. Interesting point m8, I'll keep an eye on mine now as I've also done an led swap on my '01. Link to comment Share on other sites More sharing options...
jroberts427 Posted April 16, 2022 Author Share Posted April 16, 2022 1 hour ago, Grum said: Nice job Justin. Just wondering, how does your Fi Light perform with the LED insert? Others that have installed an LED to the Fi light have noticed it constantly dimly lit. ECM provides the ground side for the light electronically and may require the similar loading effect of an incandescent globe. I actually didn't put LEDs in the dummy lights so I can't speak to the effect on the FI light. I just put 5 LEDs in the main board illumination slots. I figured the dummy lights get used so little they weren't as likely to burn out any time soon. Justin Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted April 16, 2022 Member Contributer Share Posted April 16, 2022 2 minutes ago, jroberts427 said: I actually didn't put LEDs in the dummy lights so I can't speak to the effect on the FI light. Ah good thinking 99. Link to comment Share on other sites More sharing options...
trmoyer Posted April 16, 2022 Share Posted April 16, 2022 This is interesting and going to follow. If it continues to work without issues I might just have to do this to my 98’. I don’t care for the lack of good illumination and this just might be my answer. Link to comment Share on other sites More sharing options...
Member Contributer raYzerman Posted April 16, 2022 Member Contributer Share Posted April 16, 2022 Mine with FI changed to LED..... constantly lit, so not recommended for that one. I'll be swapping the FI bulb back to incandescent. Link to comment Share on other sites More sharing options...
Member Contributer adkfinn Posted April 16, 2022 Member Contributer Share Posted April 16, 2022 Skip the dummy lights - I swapped everything but the FI light. They are too bright, IMO. The high beam indicator is annoying and I am swapping it back to incandescent shortly. Link to comment Share on other sites More sharing options...
Member Contributer adkfinn Posted April 16, 2022 Member Contributer Share Posted April 16, 2022 3 hours ago, trmoyer said: This is interesting and going to follow. If it continues to work without issues I might just have to do this to my 98’. I don’t care for the lack of good illumination and this just might be my answer. You have the option of changing the color of the illumination also - although you are limited to blues and greens basically due to the colored filter/foil in the guages. Things like red don't come through bright enough (I tried). I changed mine to blue - NOTE - The neutral light in this photo is with the replacement led installed - very BRIGHT Here it is in a darker setting - and contains a great example of the false/always lit issue using leds in the 'dummy' lights AND - I had sent this to another member years ago, here's the bulb list and source I used: ~~~~~~~~~~~~~ LEDs - I ordered from superbrightleds.com, here's my order (I replaced everything, indicator lights as well) ---> Skip the '74' series bulbs = dummy lights, Ambers are indicators if you want them ( I like that they are bright now, easier to notice in the daytime) 2 194-A4-90: Amber Wide $1.59 2 74-NWHP: Natural White $1.95 1 74-GHP: Green $1.95 1 74-BHP: Blue $1.95 5 194-B-120: Blue 120 Degree $0.99 Link to comment Share on other sites More sharing options...
trmoyer Posted April 16, 2022 Share Posted April 16, 2022 I’d opt to just do the tach, Speedo and display. But that’s just me 😊 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.