pat Posted January 20, 2021 Share Posted January 20, 2021 hi, just bought set of panniers for my vfr 12oof and think i have put the lock in wrong any idea of how to remove it ,thanks. Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted January 21, 2021 Member Contributer Share Posted January 21, 2021 Hi Pat. The 7 and 8gen panniers are the same I believe. Some time back I needed to remove the internal panel to access a stone that jammed my locking handle. Can't guarantee it, but removing the internal panel may be your only way to access the lock barrel. I needed a T20 Torx key and a 4mm Allen key. Other than that a good locksmith or even Honda customer service may be able to advise. Either way you'll probably need to be able to access the spring loaded stopper tumbler to press it in to allow the barrel to be removed from its locked position. Are you sure it's in the wrong way or just not fully seated? Looking at my own barrel install instructions I can't really see how you could insert it a wrong way! Good luck. Link to comment Share on other sites More sharing options...
pat Posted January 24, 2021 Author Share Posted January 24, 2021 after going on you tube and watched a video i managed to release the stopper in the barrel and out popped the lock, thanks 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.