Careca Posted January 20, 2021 Share Posted January 20, 2021 Are the 8 th generation tail tidies still available ? I saw a thread on here , where the tail tidy had a vfr reflector plate. Any ideas where I can get one please ? Thanks Regards, Nat. Link to comment Share on other sites More sharing options...
fatshoutybloke Posted January 21, 2021 Share Posted January 21, 2021 If you mean this one, these were made by NZCam in Australia but I don't believe he's doing any more production runs now he's sold out. The reflector was simply a piece of reflective tape with the VFR overprint but after a couple of years on mine water had got behind it and it peeled off so I've had to replace it with a 'normal' reflector anyway, I got a 1cmx10cm one on ebay. Link to comment Share on other sites More sharing options...
Careca Posted January 21, 2021 Author Share Posted January 21, 2021 Yes, thats what I was after. Thanks, i will keep looking. Link to comment Share on other sites More sharing options...
VideoGuy Posted January 23, 2021 Share Posted January 23, 2021 Somebody here was making 3D printed ones too, can't remember who but it wasn't that long ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.