Rollos Posted December 12, 2020 Share Posted December 12, 2020 Anyone successfully removed the cylinders? I have a set i need to sell and want to pull the cylinders so they can be rekeyed. Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted December 12, 2020 Member Contributer Share Posted December 12, 2020 Hi Rollos. Sad news about your bike hope you have a replacement planned? As for the lock barrels I'm not totally sure. But the last process in installing the barrels is to insert the spring loaded Stopper Tumbler which locks the barrel into position when fully inserted. So perhaps the only way to get at this to retract the stopper tumbler is to remove the whole locking assembly by unscrewing the internal case screws. This will include 4ea T20 Torx screws along with a number of 4mm Allen key screws. Then you may be able to access the barrel and push in the Stopper tumbler to then turn the barrel anti clockwise to hopefully remove it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.