mtnpat Posted November 28, 2020 Share Posted November 28, 2020 Can anyone tell me the clutch plate stack height for our bikes (1991)? I only have the factory Honda manual and I am not seeing it. Also my Google Fu is weak today. Getting ready to inspect clutch plates and wanted to measure for wear if its not obvious! Thanks! Link to comment Share on other sites More sharing options...
Member Contributer BusyLittleShop Posted November 28, 2020 Member Contributer Share Posted November 28, 2020 Going by part numbers 91 VFR 750 and 98 VFR800 employ the same friction disc... VFR750/800 clutch friction thickness p/n 22201-MS6-620 2.92mm - 3.08mm (0.115 - 0.121) service limit 2.5 (0.10) Link to comment Share on other sites More sharing options...
mtnpat Posted November 28, 2020 Author Share Posted November 28, 2020 Thank you very much. This also gave me the spring free height I was going to ask about next. Link to comment Share on other sites More sharing options...
Member Contributer BusyLittleShop Posted November 30, 2020 Member Contributer Share Posted November 30, 2020 On 11/28/2020 at 2:10 PM, mtnpat said: Thank you very much. This also gave me the spring free height I was going to ask about next. You're welcome... Link to comment Share on other sites More sharing options...
mtnpat Posted December 2, 2020 Author Share Posted December 2, 2020 For those following along, I initially asked about the clutch disks stack height which BusyLittleShop graciously provided, but also mentioned that I would be needing the clutch spring free height. I was able to get my hands on a Clymer VFR700F & VFR750F . 1986-1994 manual and grab the spring info.....for my 1991 model it is 44.4mm with a wear limit of 41.2mm. Again, just in case anyone is looking for the spring info for a 1991. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.