synchronization

[bog]

Ok guys, so on starter valve synchro, set #3 20 mm higher than #1,   set #4 10 mm higher than #1, and this is increased vacuum on the guage right?  silly question maybe but, set #2 the same as #1?   25 year aviation mechanic, ive been trained to be absolutely specific, never assume anything... bog

[Terry]

Read this:

 

https://www.vfrdiscussion.com/index.php?/forums/topic/94504-5th-gen-starter-valves-sync-incorrect-for-last-22-years/&tab=comments#comment-1111756

[Terry]

Wait a moment...you've got a 6th gen VFR if it is 2003, so all the starter valves should be set to the same vacuum. The offset vacuum applies to the 5th gen (98-01) only.

[Grum]

Hey Bog.

As Terry mentioned all level with No.4. For a 6gen. You're referring to the wrong aircraft type!

See the pictures I posted for you regards the Morgan CarbTune in your previous post. It was also mentioned the offset is for a 5gen, Not 6gen.

 

You can download the Service Manual for the 6gen. From the forum.