Jump to content

looking for a peg lowering kit for my 6 gen


birddseedd

Recommended Posts

  • Member Contributer

PM BusyLittleShop.  Many members have the lowering blocks.  An inch lower will make a lot of difference.   You probably can't go much if any lower as you'll run in to issues.  As it is you'll need to clearance the side stand and work out the brake and shift levers.

Link to comment
Share on other sites

  • Member Contributer

PEG BLOCKS a VFRD exclusive product are designed to keep your knees in the breeze...

 

Peg Blocks are specially designed using billet 6061 T6 aluminum for
the VFR800 years (5th Gen 98 to 01) and (6th Gen 02 on 09) and (8th
Gen 14 on up)... they will effectively lower Honda's foot peg 1.5
inches (38mm) from the stock position...

 

The price+ USPS flat rate priority shipping are as follows... as soon as I
receive Pay Pal payment the shipping starts...

my account netters2@comcast.net


USA Peg Blocks $85.00 + Priority Shipping $8.30 = $93.30

Canada Peg Blocks $85.00 + Priority Shipping $27.90 = $112.90

Europe Peg Blocks $85.00 + Priority Shipping $38.60 = $123.60

Australia or Denmark $85.00 + Priority Shipping $39.60 = $124.60

 

What you see is what you get...
sPJsxTE.jpg

 

Peg Block Instructions Print Out
Uxg1J6I.jpg

 

Rob's INSTALLATION GUIDE
http://www.vfrdiscussion.com/index.php/topic/34097-bls-footpeg-block-install/


VFRD site
http://www.vfrdiscussion.com/index.php?/topic/80155-peg-lowering-blocks-an-vfrd-exclusive-product/

 

Link to comment
Share on other sites

  • Member Contributer

Never knew Denmark was not part of Europa.... 🙂

Link to comment
Share on other sites

  • Member Contributer

It appears to be somewhere near Australia, based on the shipping charge!

 

Ciao,

 

JZH

Link to comment
Share on other sites

  • Member Contributer

Ok, let's run a game with our American brothers :goofy:

 

 

 

 

Place a (small) red dot on the map where you believe Denmark lies.

 

 

 

world maps images free downloads - Google Search | Political map ...

Link to comment
Share on other sites

  • 3 weeks later...

I found that the low position of the handlebars will put excessive pressure on my knee caps during riding. 0.75" bar risers and my problem was solved. Your mileage may vary as I'm 5'11.5" tall with an inseam of 32".

Link to comment
Share on other sites

  • Member Contributer

I just installed a set of Peg Blocks this week, first rate product, very happy. A bit of tweaking to get right, shifter and brake adjustment, and side stand stopper, but no big deal if you are remotely mechanically competent. Probably 2 hours start to finish.

Link to comment
Share on other sites

  • 2 weeks later...

years ago i used Buell pegs.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.vfrdiscussion.com/index.php%3F/forums/topic/18932-buell-footpegs-modification/&ved=2ahUKEwjazZevo6frAhXZWc0KHYKxAPcQFjAAegQIBhAB&usg=AOvVaw2EsvOHZjmiVYvTNn4gM856

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.