Knumbnutz Posted May 15, 2020 Share Posted May 15, 2020 Howdy from Down Under. So a little while ago I bought a VFR750.. in 1992. It was a 88 model and a lovely bike and great sound, but as a youngster with too much money, 6months later I bought a 93 Fireblade. A few years passed and a bunch of bikes later, I bought a new 98 model VFR. I sold a VTR1000 for the VFR and it was pretty much the same power and I could easily mono it without the clutch like the VTR and with the remus pipe it sounded fantastic. That love affair lasted a year or so and then on it went. Some bikes and years later I bought a 04 VFR Vtec in 2014 but there was no longer love there as without the gear drive I felt an aural loss and the VTEC was not pretty. A friend bought it, who ironically had a 95 VFR750 and now enjoys the occasional blast on the VFR800. With the exception of the VFR in 98, since 96 I have only owned twins. Guzzi - which I have 3 currently, ducati, harley, VTR's, TRX850's, buell, but there was always a good chance that another VFR would come along and today it now sits in the garage. Since I had the Blade in 93, none of my bikes have stayed standard, some a lot less than others ! The Blade got an RC30 swingarm and marvic wheel upgrade in 94, my first guzzi in 96 became what was to become my first cafe racer out of many, and my next guzzi V11 got a lot of changes as well. Possibly the most modified was my TRX850 that I did in 2016. Virtually unrecognizable with R1 forks, triumph speed triple swingarm, hyperpro shock, ducati ducktail and seat, custom pipes, R6 radiator, handmade headlight and triples clamps. Anyways.. the VFR800 is a 99 model with about 85,000km on it, and sounds terrific, but doesnt look so great. But as you can tell I like to tinker and make stuff and thats why I bought it. Over the next year or so, I will be making my style of a modern version of the Cafe Racer concept. I haven't seen too many VFR's that are my style so to speak, so hopefully it will turn out nice. Basic concept is a naked with USD front end, vfr800f rear wheel setup (in the post as I write), brembo rear caliper - strangely enough I made a caliper plate for a VFR800 swingarm that I mounted to a VTR1000 (thats another story..), TLR or similar radiator, some nice rearsets, single speedo tacho classic acewell gauge, suitable ducktail/rear end and a nice set of pipes. Below are the TRX, ST2 duke and Guzzi V11 so you can see where the VFR will go to over time. I'm really looking forward to sitting on this and hearing the engine whir like the precision instrument it is.. come along for the ride too. and the caliper bracket I did for the VTR The builds are on my flickr pages if you're interested https://www.flickr.com/photos/knumbnutz/albums No doubt I'll be asking a million questions, so bare with me. Cheers Neil Link to comment Share on other sites More sharing options...
jk0311 Posted May 18, 2020 Share Posted May 18, 2020 Subbed! Wanna see this come to life. Good luck Neil, Im in the beginning phase of a build as well. Link to comment Share on other sites More sharing options...
Knumbnutz Posted May 24, 2020 Author Share Posted May 24, 2020 Thanks. I have just got a hold of an 8th Gen Wheel in great condition and a hub is on its way from the UK to Australia... that could take a while. Last week I also bought a Triumph 675 fully adjustable USD front end which closely (enough) colour matches the rear wheel. A brembo rear brake caliper also arrived. I have an Acewell 80 Series speedo/tacho and i'll get some more PBM cnc LED indicators and switches. I have an LED headlight ready to have a housing made for it, same as the previous ones i've done. Link to comment Share on other sites More sharing options...
Member Contributer mello dude Posted May 24, 2020 Member Contributer Share Posted May 24, 2020 Great stuff, keep posting up any work on your builds. Link to comment Share on other sites More sharing options...
Knumbnutz Posted August 10, 2020 Author Share Posted August 10, 2020 Got a cbr600 front end as wellJust gathering bitsAlso got a Ducati streetfighter subframe and carbon fibre seat unit to go on Sent from my ELE-L29 using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted August 10, 2020 Member Contributer Share Posted August 10, 2020 Let the games begin!!!! Link to comment Share on other sites More sharing options...
Member Contributer mello dude Posted August 10, 2020 Member Contributer Share Posted August 10, 2020 Keep it coming! Love that old Guzzi.... Link to comment Share on other sites More sharing options...
Knumbnutz Posted August 16, 2020 Author Share Posted August 16, 2020 rough mockup Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.