Voided76 Posted January 6, 2020 Share Posted January 6, 2020 Thus begins my dive into foolish horsepower gains chasing with my 2014 VFR. Currently I have a 8th gen with: Slip on (s) various lengths, ect. RapidBike Racing with MyTuningBike and BlueBike mods along with the return to stock chip for dyno day. 520 converted drivetrain with a -1T front sprocket and lightened/crossdrilled rear sprocket. Some fiddle faddle from my olde 6th gen: Pair removal plates, Modified airbox with shorter, wider R6 stacks epoxied in. Just took delivery and bored-ly hand polished the new 5th/6th/8th header from the boys/wade on the forums. I very nearly have all the terminal hardware to do the big swap and go to the full header/airbox/autotune/timing boosted machine that CandyRed uses to great envy on my part. Considering there's a pump literally 100yards from base/home that has E85 I'm going to try to make a go for broke tune with more duty cycle and a bunch more timing to see if it makes a big difference. So it should definately rock & roll. Lemme know if you know of some places in socal that offer (cheap) dyno pulls with little to no diagnostic needs considering the RBR handles pretty much everything anyway. 2 Quote Link to comment Share on other sites More sharing options...
Member Contributer sfdownhill Posted January 6, 2020 Member Contributer Share Posted January 6, 2020 Best looking set of pipes yet - go get ‘em Voided! We did our dyno work in Orange County with Attack Performance - they charge $125 for baseline, non-tuning runs. I will PM you with two local dyno shops I found in north San Diego county - both good guys with modest operations. Closer to you is Lee’s Cycles in San Diego proper, closer to Kearny Mesa. Quote Link to comment Share on other sites More sharing options...
Sweeper Posted January 6, 2020 Share Posted January 6, 2020 Love the title! Have to follow now. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted January 6, 2020 Member Contributer Share Posted January 6, 2020 AFAIK we had an "unleashing" palaver in the past. Did not end well.... So good to see that dyno runs prior, during and after are planned 😎 Quote Link to comment Share on other sites More sharing options...
Voided76 Posted January 6, 2020 Author Share Posted January 6, 2020 That's why this is stage II dutchy considering I have parts that are actually going to make a difference lol Quote Link to comment Share on other sites More sharing options...
Member Contributer St. Stephen Posted January 6, 2020 Member Contributer Share Posted January 6, 2020 I admit I did start laughing hysterically as soon as I read the title of the post! No offense meant to you, Voided, just a blast from the past as you know. It has been a hoot following SF and Duc's header thread, look forward to seeing your dyno runs, best wishes. Quote Link to comment Share on other sites More sharing options...
Member Contributer flya750 Posted January 6, 2020 Member Contributer Share Posted January 6, 2020 I'm ready to buy SFDOWNHILL... How do I go about placing the order? 8G 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer boOZZIE Posted January 6, 2020 Member Contributer Share Posted January 6, 2020 While "unleashing the factory power" don't forget to replace the flapper with another snorkel. Hahaha Quote Link to comment Share on other sites More sharing options...
The Phantom Posted January 6, 2020 Share Posted January 6, 2020 Yep funny title, I approve 🤣 Quote Link to comment Share on other sites More sharing options...
Member Contributer Duc2V4 Posted January 7, 2020 Member Contributer Share Posted January 7, 2020 4 hours ago, flya750 said: I'm ready to buy SFDOWNHILL... How do I go about placing the order? 8G Send him and CC me on a PM with your quantity along with your shipping info. We'll get you a total and get the ball rolling. Quote Link to comment Share on other sites More sharing options...
Member Contributer sfdownhill Posted January 8, 2020 Member Contributer Share Posted January 8, 2020 On 1/6/2020 at 12:28 PM, flya750 said: I'm ready to buy SFDOWNHILL... How do I go about placing the order? 8G I’m on board w you and Duc2V4 on PMs now, Flya. Thanks Quote Link to comment Share on other sites More sharing options...
Member Contributer sfdownhill Posted January 9, 2020 Member Contributer Share Posted January 9, 2020 Voided 76, we took a vote and the outcome is that we’re using this photo of your gleaming pipes - including the crazy bird-carrying-bomb pillow - for all future marketing materials... 1 Quote Link to comment Share on other sites More sharing options...
Voided76 Posted January 10, 2020 Author Share Posted January 10, 2020 15 hours ago, sfdownhill said: Voided 76, we took a vote and the outcome is that we’re using this photo of your gleaming pipes - including the crazy bird-carrying-bomb pillow - for all future marketing materials... be my guest, that bird-carrying-a-bomb is a Prinny to be exact. They're pretty awesome, dood. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.