Rockerarm Posted October 19, 2019 Share Posted October 19, 2019 So finally I started to fix the stuff that should be fixed... I bought it impulsively in Sweden from an old man, I think in May and brought to mid Europe where I live. I couldn't resist to those stupid brakes. 🙂 It's in very nice, original, unmolested shape, has all the documents from the dealership. Original except one thing, the front right winker stem, what I smashed when I unloaded the bike from the lorry. 😡 If you have one holy grail for sale, let me know (otherwise it will be an interesting 3d printig story). To get registered, I need to do basically just regular service jobs, since the old man only changed oil and washed it in the last 10 years of his ownership. It's time to adjust valve clearence, check the timing chains, because it has some noise, change oil and filters, change brake fluid all over, tyres and break pads, carb sync, get some sort of a coat inside of the tank, so quite a lot things to do. And the bike was standing for the last couple of months and carb floater of the no3 cylinder got stucked...no problem, I have to adjust the valves anyway. 😄vi sesgo home vf, you're drunkfriend's garagehome, sweet homeI was the first who removed the carbs. Felt sooo guilty. Link to comment Share on other sites More sharing options...
Member Contributer FromMaine Posted October 20, 2019 Member Contributer Share Posted October 20, 2019 Welcome to the forum, nice looking bike.  Wish they had imported them to the US.  Try this company, I used them a few times when I lived in the UK in 2015 and had to find some parts for my 91 VFR, they were pretty good  .https://www.davidsilverspares.co.uk/VFR400KH-NC21-1987-JAPANESE/part_194202/  Best, Michael       Link to comment Share on other sites More sharing options...
Member Contributer Rush2112 Posted October 20, 2019 Member Contributer Share Posted October 20, 2019 Great looking vintage bike! Welcome to the forum! Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted October 20, 2019 Member Contributer Share Posted October 20, 2019 Jo regelt!!! 😎 Link to comment Share on other sites More sharing options...
Rockerarm Posted October 20, 2019 Author Share Posted October 20, 2019 14 hours ago, FromMaine said: Welcome to the forum, nice looking bike.  Wish they had imported them to the US.  Try this company, I used them a few times when I lived in the UK in 2015 and had to find some parts for my 91 VFR, they were pretty good  .https://www.davidsilverspares.co.uk/VFR400KH-NC21-1987-JAPANESE/part_194202/  Best, Michael       Jó estét! 🙂 Thanks for the link to the store! It's a good one, I will order the brake pads from here. I will keep this topic updated when something going to happen to the bike. Regards, Attila Link to comment Share on other sites More sharing options...
Member Contributer Terry Posted October 21, 2019 Member Contributer Share Posted October 21, 2019 Good luck with your restoration; I owned a couple of these back in the 80's from new, great little bikes that punched well above their weight. Managed a couple of 900km days on one but then I was young and stupid. I managed to wind my first one out to 210km/hr down a long hill much to the surprise of my friend alongside on his GPz900. The brakes are a bit complicated but once you figure out the right disassembly sequence they're not too bad to work with, but you can overheat them easily when playing hard.  Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted October 21, 2019 Member Contributer Share Posted October 21, 2019 10 hours ago, Rockerarm said: Jó estét! 🙂 Thanks for the link to the store! It's a good one, I will order the brake pads from here. I will keep this topic updated when something going to happen to the bike. Regards, Attila    On the VF400F I had, the brake pads were worn, but the spare set of wheels had a good set of NISSIN ones. These braked very well I must say.  The new owner bought the bike for his son-in-law. He mailed me a picture of the happy chappy!  Link to comment Share on other sites More sharing options...
jeremyr62 Posted October 21, 2019 Share Posted October 21, 2019 I remember when small capacity 4 cylinder bikes were pretty much the norm in the 80s. Compared to today's ubiquitous parallel twins they seem very exotic. I have heard a rumour that Kawasaki are bringing out an inline 4 cylinder 250. Should be interesting if true. Here are some old pictures of my VF400 from 1984. Owned a year and then I couldn't 'afford to insure it so had to sell it on. Link to comment Share on other sites More sharing options...
Rockerarm Posted October 23, 2019 Author Share Posted October 23, 2019 On 10/21/2019 at 8:22 AM, Dutchy said:    On the VF400F I had, the brake pads were worn, but the spare set of wheels had a good set of NISSIN ones. These braked very well I must say.  The new owner bought the bike for his son-in-law. He mailed me a picture of the happy chappy!  I should have buy this bike... I bought a spare bike too with blown engine, but turned out that it is has no part in usable condition. 😤 Link to comment Share on other sites More sharing options...
Rockerarm Posted October 23, 2019 Author Share Posted October 23, 2019 Small progress for today. I cleaned the carbs from the outside and I found broken overflow rubber hose...that was the reason why I had petrol flown between the cylinders. Bad news that I have to remove the carbs from the base plate in order to change it. I really don't want to do it, because I'm afraid that I will damage the connecting fuel lines' o-ring. Of course the sync will be gone, but will I cause any permanent harm to the carbs if I remove them from the plate? Can they be synced properly later?  Link to comment Share on other sites More sharing options...
Rockerarm Posted October 23, 2019 Author Share Posted October 23, 2019 On 10/21/2019 at 11:44 AM, jeremyr62 said: I remember when small capacity 4 cylinder bikes were pretty much the norm in the 80s. Compared to today's ubiquitous parallel twins they seem very exotic. I have heard a rumour that Kawasaki are bringing out an inline 4 cylinder 250. Should be interesting if true. Here are some old pictures of my VF400 from 1984. Owned a year and then I couldn't 'afford to insure it so had to sell it on.      Running smoother than a twin for sure, but more complex and today we don't like (to pay for) complicated things. 😄Times are also gone when japanese maunfactures wanted to prove their quality.  I like this red-white-gray color scheme too. Link to comment Share on other sites More sharing options...
jeremyr62 Posted October 23, 2019 Share Posted October 23, 2019 I had to do the same with a set of VF500 carbs. It is straightforward enough but fiddly work. Take lots (and lots) of photographs before you start and be very methodical about it labelling stuff where necessary. Does the spare bike you have have a set of carbs too. Keep these as a reference or practice on them? Â Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted October 24, 2019 Member Contributer Share Posted October 24, 2019 7 hours ago, Rockerarm said: Small progress for today. I cleaned the carbs from the outside and I found broken overflow rubber hose...that was the reason why I had petrol flown between the cylinders. Bad news that I have to remove the carbs from the base plate in order to change it. I really don't want to do it, because I'm afraid that I will damage the connecting fuel lines' o-ring. Of course the sync will be gone, but will I cause any permanent harm to the carbs if I remove them from the plate? Can they be synced properly later?  You want to remove the plenum anyway and REPLACE the fuel tube o-rings. They are 35+ years old and WILL be a problem soon. Do it now. It's not that hard and they are easy to source without buying the whole "carb kit". Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted October 24, 2019 Member Contributer Share Posted October 24, 2019 14 hours ago, Rockerarm said: I should have buy this bike..  I gave you 1st dibs......     But granted, you had other/better things on your mind eh? Link to comment Share on other sites More sharing options...
RS125 Posted October 29, 2019 Share Posted October 29, 2019 Very nice. US gets left out on some really cool bikes. Enjoy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.