Cheburashka Posted September 2, 2019 Share Posted September 2, 2019 There are a few different methods to debaffle the stock exhaust. Seems like the easiest one is to just grab a drill and a bit. Is this still the best and fastest method? Anything I should watch out for? Am I correct in understanding that I can just drill though the top baffles using a 5/8 bit? Thanks! Sent from my PH-1 using Tapatalk Link to comment Share on other sites More sharing options...
HighwayStar2009 Posted September 6, 2019 Share Posted September 6, 2019 I used a 5/8 countersink bit on a 12" locking extension, all on a drill. But first, start the holes with a 12" drill bit then go in with the countersink bit. I drilled a few holes down each of the 4 exhaust tips. It has a little rumble sound now. Bought another oem exhaust to do this on & shelved the original. I want it louder, may do some more drilling! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.