Member Contributer vfrcapn Posted December 10, 2022 Member Contributer Share Posted December 10, 2022 Any ballpark on pricing this go around? Quote Link to comment Share on other sites More sharing options...
Member Contributer ShipFixer Posted December 10, 2022 Member Contributer Share Posted December 10, 2022 3 hours ago, vfrcapn said: Any ballpark on pricing this go around? 1 3 Quote Link to comment Share on other sites More sharing options...
Gotama Posted December 15, 2022 Share Posted December 15, 2022 I’m seeing a lot of posts about what exhaust cans to get for the system. Here’s my two. Cents. Long time ago FMF racing made a dual can system for these bikes, those days are long gone. What I was able to do and research is that any exhaust system off of a similar year Yamaha R1 can be fitted up to a custom splitter pipe. Which sfdownhill fabricated for my particular project I wasn’t expecting him to knock this completely out of the park with such an awesome fabricated job. 4 1 Quote Link to comment Share on other sites More sharing options...
VFR750F3 Posted December 15, 2022 Share Posted December 15, 2022 https://www.aliexpress.us/item/3256804654216656.html?spm=a2g0o.productlist.main.3.5d927470c98cJK&pdp_ext_f={"sku_id"%3A"12000030698218738"}&pdp_npi=2%40dis!USD!283.47!206.93!!!!!%402102169316711174240026191d076b!12000030698218738!sea&curPageLogUid=srzSNuD7EYSJ cheap replacement 1 Quote Link to comment Share on other sites More sharing options...
vfrrrrrr Posted December 15, 2022 Share Posted December 15, 2022 I bought that Aliexpress exhaust linked above and can confirm it fits well and sounds good. Will post some photos later to show fitment if anyone wants. Quote Link to comment Share on other sites More sharing options...
Member Contributer jefferson Posted December 16, 2022 Member Contributer Share Posted December 16, 2022 On 12/15/2022 at 7:48 AM, Gotama said: I’m seeing a lot of posts about what exhaust cans to get for the system. Here’s my two. Cents. Long time ago FMF racing made a dual can system for these bikes, those days are long gone. What I was able to do and research is that any exhaust system off of a similar year Yamaha R1 can be fitted up to a custom splitter pipe. Which sfdownhill fabricated for my particular project I wasn’t expecting him to knock this completely out of the park with such an awesome fabricated job. Tell us some more about this sfdownhill. All I got from searching was skateboard stuff. That's some mighty fine workmanship. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer flya750 Posted December 17, 2022 Member Contributer Share Posted December 17, 2022 For those who aren't on FB and haven't seen this video. This is what the VFRD Headers can DO for you! The VFRD Headers are Well Worth the Pennies... FYI, My YT channel has many other videos. 7 Quote Link to comment Share on other sites More sharing options...
Member Contributer sfdownhill Posted December 21, 2022 Author Member Contributer Share Posted December 21, 2022 On 8/12/2022 at 9:42 PM, Ziffer said: Ziffer Skids DivisibleRex CornPoweredV4 JZH vfrcapn RC51Nick jkboyd MikeOConner PearlBlueSoul SEBSPEED Oregonian Blessingshawn zinsern Duste Flya750 davidkohli JudgeanJury More VFR800 headers will be built! First off - as always - thanks a metric ton to Duc2V4 for all he's done to suit up and show up on this thread and throughout the header project. He is and always has been a stand up guy for anyone who owns a VFR [or any motorcycle that's not a Harley] and has been helping me get through this late fall - solid as a rock. Second shout out goes to VFRD member Ziffer for posting the latest list [see above] of people interested in headers for their 5, 6, and/or 8 gen VFR800s! I dropped by Wade's shop last week, totally unannounced because I was nowhere near the neighborhood, 12-pack of 805 ale in hand, and saw him building exhausts. No more hot glue experiments, he's back to cutting and welding stainless steel tubes together. And he's willing to bend, cut, and weld some for VFRs [Those of you who were along at the beginning of this thread recall Wade's rather - shall we say - 'gruff' nature]. Syntax error - my apologies because I just fumbled at the 5 yard line when I went to copy/paste the list above and accidentally deleted 35 minutes of writing I'd done for this post. Sorry but it's late and I'll post again tomorrow with more details. Part of the self-deleted post was me realizing I failed to ask Wade if the price remains the same as it was two years ago when we placed our last order. I'll text him to death tomorrow and get accurate details and instructions posted here. 8 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted December 21, 2022 Member Contributer Share Posted December 21, 2022 To save trawling through 57 pages, could someone please reiterate whether a PC or other such device is required with this? It's been so long I've forgotten. Any other requirements - mounting etc? Many thanks. Quote Link to comment Share on other sites More sharing options...
Member Contributer sfdownhill Posted December 21, 2022 Author Member Contributer Share Posted December 21, 2022 9 hours ago, Skids said: To save trawling through 57 pages, could someone please reiterate whether a PC or other such device is required with this? It's been so long I've forgotten. Any other requirements - mounting etc? Hey Skids - a Power Commander, Rapid Bike, or other fuel management system is not required, but the VFR's engine exhales so differently with the WiLD headers that it would significantly diminish the effectiveness of the headers to not adjust the inhale [fueling] to match the new exhale [exhaust]. Guys have been getting good results using the Power Commander maps we had done for the headers on 5, 6, and 8 gens, so you can get 98.5% of the benefit of tuning without taking your VFR to the dyno. But you will need a PC, RB, or other tuneable fuel management system. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer interceptor69 Posted December 21, 2022 Member Contributer Share Posted December 21, 2022 I can confirm using the Attack map that was done w/ a PCIII USB results in much more pronounced thrust once past 7,000 RPM. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted December 21, 2022 Member Contributer Share Posted December 21, 2022 29 minutes ago, sfdownhill said: Hey Skids - a Power Commander, Rapid Bike, or other fuel management system is not required, but the VFR's engine exhales so differently with the WiLD headers that it would significantly diminish the effectiveness of the headers to not adjust the inhale [fueling] to match the new exhale [exhaust]. Guys have been getting good results using the Power Commander maps we had done for the headers on 5, 6, and 8 gens, so you can get 98.5% of the benefit of tuning without taking your VFR to the dyno. But you will need a PC, RB, or other tuneable fuel management system. Thanks m8. 1 Quote Link to comment Share on other sites More sharing options...
MikeOConner Posted December 22, 2022 Share Posted December 22, 2022 Are these headers being produced again? If they are can I be placed on the current list? I have a 1998 Honda VFR. Quote Link to comment Share on other sites More sharing options...
Member Contributer Skids Posted December 22, 2022 Member Contributer Share Posted December 22, 2022 31 minutes ago, MikeOConner said: Are these headers being produced again? If they are can I be placed on the current list? I have a 1998 Honda VFR. It looks like it. I'm sure your name will be picked up and added to the list. Quote Link to comment Share on other sites More sharing options...
Member Contributer RC51Nick Posted December 23, 2022 Member Contributer Share Posted December 23, 2022 Glad I am on the list. I am NOT missing out on this batch!! Quote Link to comment Share on other sites More sharing options...
Member Contributer VFR78 Posted December 23, 2022 Member Contributer Share Posted December 23, 2022 Any idea of the cost yet? Quote Link to comment Share on other sites More sharing options...
Member Contributer vfrcapn Posted December 24, 2022 Member Contributer Share Posted December 24, 2022 3 hours ago, VFR78 said: Any idea of the cost yet? Quote Link to comment Share on other sites More sharing options...
Member Contributer Ziffer Posted January 1, 2023 Member Contributer Share Posted January 1, 2023 On 12/22/2022 at 5:00 AM, MikeOConner said: Are these headers being produced again? If they are can I be placed on the current list? I have a 1998 Honda VFR. Gotcha. You're on the list. Quote Link to comment Share on other sites More sharing options...
Member Contributer Ziffer Posted January 1, 2023 Member Contributer Share Posted January 1, 2023 This is the latest list I have. If you're not on it, but wanna be, speak up! 1. Ziffer 2. Skids 3. DivisibleRex 4. CornPoweredV4 5. JZH 6. vfrcapn 7. RC51Nick 8. jkboyd 9. MikeOConner 10. PearlBlueSoul 11. SEBSPEED 12. Oregonian 13. Blessingshawn 14. zinsern 15. Duste 16. Flya750 17. davidkohli 18. JudgeanJury 19. Ian Summers Unable to sign up due to non-functioning verification emailer 20. Lotus Quote Link to comment Share on other sites More sharing options...
Member Contributer Ziffer Posted January 1, 2023 Member Contributer Share Posted January 1, 2023 On 12/23/2022 at 4:52 PM, vfrcapn said: I delivered papers when I was a kid. I remember there were some people who didn't want to pay the two dollars they owed! Quote Link to comment Share on other sites More sharing options...
omgvfr Posted January 1, 2023 Share Posted January 1, 2023 Speaking up, for a 99 model. A high mount link pipe is all thats left to find... Edit: found a Remus Grand Prix high mount that fits. 🙂 Quote Link to comment Share on other sites More sharing options...
Member Contributer Ziffer Posted January 1, 2023 Member Contributer Share Posted January 1, 2023 9 hours ago, omgvfr said: Speaking up, for a 99 model. A high mount link pipe is all thats left to find... You are now on the list: 1. Ziffer 2. Skids 3. DivisibleRex 4. CornPoweredV4 5. JZH 6. vfrcapn 7. RC51Nick 8. jkboyd 9. MikeOConner 10. PearlBlueSoul 11. SEBSPEED 12. Oregonian 13. Blessingshawn 14. zinsern 15. Duste 16. Flya750 17. davidkohli 18. JudgeanJury 19. Ian Summers Unable to sign up due to non-functioning verification emailer 20. Lotus 21. omgvfr 1 Quote Link to comment Share on other sites More sharing options...
TNDragonrider Posted January 7, 2023 Share Posted January 7, 2023 Please add me to the list for 6th generation full system headers. TN Dragonrider Quote Link to comment Share on other sites More sharing options...
Member Contributer Ziffer Posted January 9, 2023 Member Contributer Share Posted January 9, 2023 On 1/7/2023 at 2:31 AM, TNDragonrider said: Please add me to the list for 6th generation full system headers. TN Dragonrider You're on it. 1. Ziffer 2. Skids 3. DivisibleRex 4. CornPoweredV4 5. JZH 6. vfrcapn 7. RC51Nick 8. jkboyd 9. MikeOConner 10. PearlBlueSoul 11. SEBSPEED 12. Oregonian 13. Blessingshawn 14. zinsern 15. Duste 16. Flya750 17. davidkohli 18. JudgeanJury 19. Ian Summers Unable to sign up due to non-functioning verification emailer 20. Lotus 21. omgvfr 22. TNDragonrider Quote Link to comment Share on other sites More sharing options...
Member Contributer Ziffer Posted January 9, 2023 Member Contributer Share Posted January 9, 2023 On 12/23/2022 at 1:12 PM, VFR78 said: Any idea of the cost yet? I don't know. I think the last round was around $1700. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.