Jump to content
jeffyjeff

5th Gen Parts and Tools

Recommended Posts

I logged nearly 80,000 miles on two 5th gen VFRs between 2010 and 2017.  I had a ’98 from 2010-15, then sold it to purchase a low mileage 2000 model.  Unfortunately, my son crashed it last year, bending the front wheel, forks, and cracking the frame at the steering head.  All I’m left with is a bin of parts and tools from past and planned maintenance projects.  Great souvenirs of my most favorite bikes ever, but I’ll never use them, so it’s time to part ways.

 

Cutout Rear Cowl: $60 plus actual shipping cost

Here is a rear cowl that I cut out so I could install the grab handles.  I found the grab handles to be very useful in putting the bike up on the center stand for tire inspection and chain maintenance. 

P2020289C.thumb.jpg.776c21b1ff74fd678404864fa8b54fa3.jpg

P2020290C.thumb.jpg.8b145a75dfb85c7abd599e989459202a.jpg

DSC01894.thumb.jpg.7666eceebfdf2b4b9021db7978d4a2e9.jpg

 

Corbin Smuggler Seat (cutout)  with 5th Gen Grab Handles: $400 plus actual shipping cost

The Corbin is a little firmer than stock; super comfortable and good looking.  The rear cowl has a lockable flip up lid that allows access underneath for stowing small items (camera, water bottle, sun glasses, etc).  This one is in very good condition; not perfect, there are some hairline cracks in the paint on the inside of the compartment.  Also, I have cut it out for use with the grab handles, which may or may not be appealing to you.  Note:  I’ll sell the seat separately, but the seat must be sold before I’ll part with the grab handles.  Price on the seat w/o the handles negotiable.

P2020284C.thumb.jpg.9d9443801a7527948216ae020b19bd07.jpg

P2020285C.thumb.jpg.fa79e8af775cc3a11cb380352ac958e6.jpg

P2020288.thumb.JPG.364d9922f38b6eb1aaccb47020d1c8b6.JPG

_MG_4634C.thumb.jpg.ee2120a72f87e1c32088008fe784a717.jpg

D&D Slip-On: $60 plus actual shipping cost

Got this one with my 2000VFR.  It is a little louder than stock with a deep, throaty sound.  Painted with VHT Ford Red engine enamel.  Bracket and clamp included.

 

PB290415C.thumb.jpg.05f95b1779ec73c8abc66d24ac7b89ae.jpg

DSC01895C.jpg.ff351d6c8ea0167d844f899abb77d5c1.jpg

 

VFR Right Lower Cowl (fairing)  $60 plus actual shipping cost

This fairing was involved in a crash that rashed up the side and broke up the lower stay area.  The damage has been repaired.  I used this part to test paint colors, so it will need to be sanded and repainted.  It is a genuine Honda part, not Chinese.  Also, some of the foam backing is in well-used condition (see pictures)

PB300419.thumb.JPG.4c120f0212b4bb47fda17ddc9436937e.JPG

PB300422.thumb.JPG.ba9a7038125913c15d061426cbeb019d.JPGPB300423.thumb.JPG.63165f4847175f0b2e35394e38cb6fd7.JPG

PB300424.thumb.JPG.803092a7914130417baa361961f5b3e5.JPG

PM me if you are interested in any of this stuff.  I will be happy to answer any questions you may have.   Let’s talk.  Thanks for looking.   Jeff J.

PB290417C.jpg

Edited by jeffyjeff
Parts and Tool package tentatively sold.

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Privacy Policy.