brockfan05 Posted November 9, 2018 Share Posted November 9, 2018 LOVE this bike but boy are the downpipes, centre stand and foot pegs UGLY. I'm thinking of just taking the headers off and using a satin black exhaust paint to tidy them up a little but I feel that will only take a year or 2 to wear away and will continually need re doing. Either that or get them ceramic coated but not sure of the cost of that at my local yet. Foot pegs I will eventually get powder coated to match the rear pegs and wheels so that's not so much of an issue really but still crappy to look at in the mean time. As for the centre stand. Well I don't really want to remove it. Its handy to have. Maybe just a can of satin black will help tidy it up a little? Although I have a single swing arm stand as well and I only really use the centre stand at home for chain cleaning so I might be better off shaving some weight and tidying the underneath up a little by removing the centre stand and just using my single side stand instead. Second photo attached as I cant walk away on a negative note regarding this awesome bike LOL Cheers guys. Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted November 9, 2018 Member Contributer Share Posted November 9, 2018 Nothing a good clean, degrease and rattle can black HT can't fix.... Link to comment Share on other sites More sharing options...
Sweeper Posted November 9, 2018 Share Posted November 9, 2018 The bike looks so good who would even notice that stuff.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer vfrcapn Posted November 9, 2018 Member Contributer Share Posted November 9, 2018 Do you know the paint code for that red? Link to comment Share on other sites More sharing options...
brockfan05 Posted November 9, 2018 Author Share Posted November 9, 2018 1 hour ago, vfrcapn said: Do you know the paint code for that red? Sorry mate its a custom paint job so no colour code as such. Essentially its the Mazda Soul Red colour all the new Mazda's a running around in but with more Fleck in it than the Mazda. Looks even better in person. The camera does not catch the fleck very well. 7 hours ago, Dutchy said: Nothing a good clean, degrease and rattle can black HT can't fix.... I'm thinking this will be the easiest and cheapest way. Unfortunately I don't get to put many km's on the bike so a descent exhaust paint should hopefully last quite some time. Link to comment Share on other sites More sharing options...
Member Contributer MaxSwell Posted November 9, 2018 Member Contributer Share Posted November 9, 2018 Man! That is one beautiful machine. So shiny! I thing it looks fabulous as it is. I agree with Sweeper.You obviously have great taste in mc's. Be proud and ride it. Long and safe. Link to comment Share on other sites More sharing options...
brockfan05 Posted November 9, 2018 Author Share Posted November 9, 2018 6 hours ago, Sweeper said: The bike looks so good who would even notice that stuff. Sent from my iPhone using Tapatalk When not being ridden, the bike sits in my game room. So it gets looked at a lot hence I seem to notice the little things haha. Its annoying sometimes but being fussy means I ride a good clean bike haha. 1 hour ago, MaxSwell said: Man! That is one beautiful machine. So shiny! I thing it looks fabulous as it is. I agree with Sweeper.You obviously have great taste in mc's. Be proud and ride it. Long and safe. Cheers mate. I love this thing but as above. I have too much time to look at it when not riding it so I notice these things haha. Link to comment Share on other sites More sharing options...
Member Contributer gig Posted November 10, 2018 Member Contributer Share Posted November 10, 2018 paint and wrap down pipes with TI wrap, remove heat sheild. Center stand can be used with allen wrenches when needed, use black lug nuts, replace foot pegs with cbr 600, replace the 4lb rear rotor with 2lb galfer \ Link to comment Share on other sites More sharing options...
Member Contributer gig Posted November 10, 2018 Member Contributer Share Posted November 10, 2018 1 Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 Delkevik headers are not well designed, my butt dyno tells me I've lost top end but gained bottom, but they do look good when you're exposing everything. Still in two minds about losing center stand. Will I or won't I? Link to comment Share on other sites More sharing options...
keef Posted November 11, 2018 Share Posted November 11, 2018 Sebspeed adapfors and sato copy rearsets Link to comment Share on other sites More sharing options...
keef Posted November 11, 2018 Share Posted November 11, 2018 And gus, if you've already done the shock and rearsets, you dont need the centre stand anymore. Lose the weight. Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 I've set out to remove it three times now Chris, and chickend out at the end. Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 I might have an Ohlins on the way, so waiting until I see it before I decide. Link to comment Share on other sites More sharing options...
keef Posted November 11, 2018 Share Posted November 11, 2018 I did a trackday on thursday. My footpegs dont scrape any more, rearsets are awesome. I did manage to scrape my fireblade side stand. Not sure how i can make that higher. Take it off after the ohlins goes in. Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 My JD rear shock is also due to be rebuilt. Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 Take the side stand off and carry the rear stand on a back pack😁 Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 and I'm also in the progress of putting together an SP2 front end with VFR1200 triples. Link to comment Share on other sites More sharing options...
brockfan05 Posted November 11, 2018 Author Share Posted November 11, 2018 36 minutes ago, VFROZ said: Delkevik headers are not well designed, my butt dyno tells me I've lost top end but gained bottom, but they do look good when you're exposing everything. Still in two minds about losing center stand. Will I or won't I? I cannot deny they look the goods but yeah definitely not 100% on the performance to $$$ value there. Bike looks good mate. Should do a VFR Syd meet up sometime soon I think. Link to comment Share on other sites More sharing options...
Member Contributer VFROZ Posted November 11, 2018 Member Contributer Share Posted November 11, 2018 I've tried to organize a ride a couple of times here with no luck. Most of the OZVFR.COM club went to BMW's, and the site was left to decompose. I'm happy to join anyone for a good ride. I do three or four long rides a year with my mates, the rest is day escapes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.