Urbanengineer Posted September 14, 2018 Share Posted September 14, 2018 On 9/8/2018 at 3:13 PM, NodakVFR said: I believe I found the problem to charging system. Just a guess, but it looks a little "crispy" to me. I've changed the R/R already, and now I'm trying that "pull-a-plug" from one side to the other technique I saw at SumSum '18! Never a Carver around when ya need one! You need to test it. Just because it has discoloration doesn’t mean It’s bad test each phase to ground and look for no continuity. Test each phase to one another, you need continuity here. Test voltage at idle and at higher RPM’s. Should see around 20V at idle and 60V at 7000 RPM. Here is mine, which tested well. And works well still. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.