VFR80025th Posted July 18, 2018 Share Posted July 18, 2018 I'm planning on changing out my rear pads with EBC HH FA261HH Anybody have any experience with these. or do you prefer OEM which will be pricier Thxs Link to comment Share on other sites More sharing options...
Member Contributer adkfinn Posted July 18, 2018 Member Contributer Share Posted July 18, 2018 EBC HH all the way. These are great pads, strong bite cold and hot. I have them on both of my bikes. Link to comment Share on other sites More sharing options...
Member Contributer VARIABLE9 Posted July 18, 2018 Member Contributer Share Posted July 18, 2018 EBC are great products. Galfer probably has an equivalent as well. Also good. Link to comment Share on other sites More sharing options...
sudo Posted July 18, 2018 Share Posted July 18, 2018 I use them front and rear on my '02. My last set of rear pads lasted 14k miles of mostly urban riding. Link to comment Share on other sites More sharing options...
Member Contributer Terry Posted July 18, 2018 Member Contributer Share Posted July 18, 2018 EBC HH on my 3 bikes (and a set ready for my scooter too!). Great pads. Link to comment Share on other sites More sharing options...
VFRpwr Posted July 19, 2018 Share Posted July 19, 2018 Great pads with high heat resistance and great bite. Virtually no compromise from stock. Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted July 19, 2018 Member Contributer Share Posted July 19, 2018 All of the above - Excellent pads. Link to comment Share on other sites More sharing options...
Member Contributer boOZZIE Posted July 19, 2018 Member Contributer Share Posted July 19, 2018 I just bought a set of the afore mentioned (not yet installed). How's the dust? as the previous set of Brembo pads would cover the rear rim, and I mainly use front brake only, being linked and all Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted July 19, 2018 Member Contributer Share Posted July 19, 2018 2 hours ago, boOZZIE said: I just bought a set of the afore mentioned (not yet installed). How's the dust? as the previous set of Brembo pads would cover the rear rim, and I mainly use front brake only, being linked and all Still got my OEM's in the front but have had the EBC's in the rear for quite a while, have not noticed any greater dust build up on the rear wheel than previously experienced with the OEM's, same goes for previous bikes I've fitted the EBC HH's to. Not far off fitting a set of new fronts and they will certainly be the EBC HH's, any potential additional brake dust is far outweighed by EBC HH's performance. IMO Cheers. Link to comment Share on other sites More sharing options...
Urbanengineer Posted July 19, 2018 Share Posted July 19, 2018 If you want less dusting consider a ceramic pad, like the cars have all moved to. They provide pretty good stopping power with clear / lesser dust than metallics like EBC HH. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.