Member Contributer Normand Posted April 24, 2018 Member Contributer Share Posted April 24, 2018 Where is the best place to wire a volt meter ? Link to comment Share on other sites More sharing options...
Member Contributer Terry Posted April 24, 2018 Member Contributer Share Posted April 24, 2018 My view is the best place is direct to the battery terminals, but through a switching relay so that the positive connection is only connected when the ignition is switched on. I took a feed from a tail light wire to trigger the relay on my bike. Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted April 24, 2018 Member Contributer Share Posted April 24, 2018 Agree with Terry. Directly on the battery. You can also purchase cheap as chips a 3 wire digital voltmeter, this allows you to hard wire the pos and neg sense wires to the battery, while the third wire is power for the voltmeter, simply connect this to any switched power source, no relay required. Link to comment Share on other sites More sharing options...
Member Contributer Normand Posted April 25, 2018 Author Member Contributer Share Posted April 25, 2018 Thanks guy's. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.