Member Contributer swimmer Posted January 25, 2018 Member Contributer Share Posted January 25, 2018 Does anyone whether or not this tool from Motion Pro is suitable to use for adjusting the exhaust valves? The service manual does not state what size the nut are and I don't recall from the last time I had my valve covers apart. https://www.motionpro.com/product/08-0073 Link to comment Share on other sites More sharing options...
ridered Posted March 6, 2018 Share Posted March 6, 2018 I have the tool at home. I can see what size it is so you only have to order the one you need. Otherwise the set will work. I believe it is the 8/3 Link to comment Share on other sites More sharing options...
Forum CEO HispanicSlammer Posted March 7, 2018 Forum CEO Share Posted March 7, 2018 they actually have a set at walmart online for 35 https://www.walmart.com/ip/6Pc-Valve-Tappet-Adjusting-Set/125313769?wmlspartner=wlpa&selectedSellerId=13325&adid=22222222227050232933&wmlspartner=wmtlabs&wl0=&wl1=g&wl2=c&wl3=145309393344&wl4=pla-260550402130&wl5=9029015&wl6=&wl7=&wl8=&wl9=pla&wl10=118779655&wl11=online&wl12=125313769&wl13=&veh=sem Link to comment Share on other sites More sharing options...
Member Contributer swimmer Posted March 8, 2018 Author Member Contributer Share Posted March 8, 2018 The above set I bought did not work. Too big. It didn't matter because my valves were in spec. Link to comment Share on other sites More sharing options...
crakerjac Posted March 8, 2018 Share Posted March 8, 2018 27 minutes ago, swimmer said: The above set I bought did not work. Too big. It didn't matter because my valves were in spec. Which set above? The one's HS posted from Wally World or the one you posted from Motion Pro? Link to comment Share on other sites More sharing options...
Member Contributer swimmer Posted March 8, 2018 Author Member Contributer Share Posted March 8, 2018 1 hour ago, crakerjac said: Which set above? The one's HS posted from Wally World or the one you posted from Motion Pro? I bought a set off of ebay which is the same as the one HS posted. It appears the hex sizes are the same as the motion pro. If you look in the maintenance manual it gives the part number for the OEM tool. If I were buying now, knowing I would need the tool I'd order the OEM one, though I'd search around for a cheaper-than-dealer source. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.