Jump to content

NEW Hindle full system exhausts to be available for the 86/87 VFR!!!


evl_twn

Recommended Posts

  • Member Contributer

well I figure I have a tad of wiggle room I only paid $500 for the bike got it running for another $100 put into the carbs. then another $600 into fairings so far. oh wait this is adding up fast another $1000 for full exhaust. another $1000 to get the suspension done, maybe $500 to get it painted.... damn I could bought a nice bike when all done. I am sure I am forgetting something.  I am just glad I don't pay myself labor fees it would cost to much hah 

Link to comment
Share on other sites

  • Replies 64
  • Created
  • Last Reply
  • Member Contributer

Well, I already have the F2 wheel conversion, Fox twin clicker, fork brace, gold valves, Corbin seat, radial front mc, ss brake lines, and the micron exhaust, so why not a full exhaust, it is the 700. Besides, it probably has a complex being parked next to my other bike in the garage.

 

I sent them a message yesterday, we will see what they say.

Link to comment
Share on other sites

  • Member Contributer

Hindle sent me to Ripple Rock Racers, they said 800 CND for the system (+75 for carbon can), 300 CND deposit, 4-6 weeks to delivery.

Link to comment
Share on other sites

  • Member Contributer

I screwed up too, 1,000 CND, roughly $800 USD.  

Link to comment
Share on other sites

On 3/14/2018 at 12:45 PM, CharlieFoxtrot said:

Joe, I think you did the math backwards.  $1 Canadian is $0.77 US.

 

I sure did. Looks much mo' better your way:

 

cvrtr.jpeg

Link to comment
Share on other sites

  • Member Contributer

just got my $900 usd shipped quote. high mount with titanium 14" muffler, told him to send a invoice :(

Link to comment
Share on other sites

  • Member Contributer

I placed my order, low mount carbon 16", 4-6 weeks we will see, may take a while to get it installed...

Link to comment
Share on other sites

  • 2 months later...
  • Member Contributer

any update on these, I put a deposit on them and have not heard anything from them since, may have to email them this week

Link to comment
Share on other sites

  • Member Contributer

emailed them tonight at 7:30 got this email back by 8:00

 

 

Dakota,

We installed the first one from the jigs this afternoon and it’s all looking very good. We will make a couple of small adjustments next week and pull a second one which should be it. As soon as we are sure we are happy with the product I’ll be chasing you for the balance and we will ship!! I’m very excited about this pipe, it’s been quite the journey but I think worth it. I’ll send you some pics from today

All the best,
Kemp

Sent from my iPhone

> On Jun 14, 2018, at 7:37 PM, dakota ferrin <threedcycle@hotmail.com> wrote:
>
> Name: dakota
>
> Email: threedcycle@
>
> Message: hello, I am just checking in on the 1986 vfr exhaust system progress, I put a deposit on a set a couple months ago and just wondering what the time frame is looking like,
> thanks
> Dakota

Link to comment
Share on other sites

  • Member Contributer
19 hours ago, 3dcycle said:

GetFileAttachment?id=AQMkADAwATZiZmYAZC05MzMAYy1jMWU3LTAwAi0wMAoARgAAAzsDyEQoXLpCsQxXlllvkNAHAMJwj4hYtm1BmgAJ87nXlZsAAAIBDAAAAMJwj4hYtm1BmgAJ87nXlZsAAq1Y7%2B4AAAABEgAQABV1nkXJaixBiHsqrsNpZKQ%3D&X-OWA-CANARY=zTdr6H5bOU6R36iWSguzv2D_NcBW0tUY4Dh557M2iNnPf-kq4KLC6iv0WP0sYuoPJUUyuKXIxjQ.&token=eyJhbGciOiJSUzI1NiIsImtpZCI6IjA2MDBGOUY2NzQ2MjA3MzdFNzM0MDRFMjg3QzQ1QTgxOENCN0NFQjgiLCJ4NXQiOiJCZ0Q1OW5SaUJ6Zm5OQVRpaDhSYWdZeTN6cmciLCJ0eXAiOiJKV1QifQ.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.MliOKN3jdqLV2Z1FYH4AZKEEJO_FIoOa_zHkYgd6wmNH0esnG7iRXP-6ju5JNMCQ3gbHH869assZWcCECSHL-AJa5YK8V2WtVSKYkWle7KnNrp7uasB0hWpCdaBiIcccxcG39j_4POU-LvGosrQUhpYE0SigiiX0ndYPCfkJJAJ3oYfgtbt61XZZU1APAiwklsOuBvCdF2MVWnOkX30W-2UlZszo0La9XibC5MUgcBF0gN3FPCSVIfsUs4sIKhAeSmiZ4EAHWsb0FhaFXB_mUdy2kN6-GOto1o84PW-q9SZ8u93Igo-3kLUqMRfSXH8NpZKLZ8wasO--65QoGcO4rA&owa=outlook.live.com&isc=1&isImagePreview=True

Wow! That's what I call Motorcycle Porn. Beautiful.

Link to comment
Share on other sites

On 3/9/2018 at 5:31 AM, evl_twn said:

 

IMG_3725.JPG

IMG_3718.JPG

 

 

I sure like the swing arm brace! Sure also bike porn as the exhaust!

Twin radiators ala RC30 cool also!

Link to comment
Share on other sites

  • Member Contributer

Kemp is a great guy to deal with.  I have a SS exhaust coming from him for my CB1100F.  Several guys from the 1100F.net forum that I ride with have Hindle exhausts on their 1100F's.  They look and sound awesome and are a great value.  How often do we get lucky enough to have someone like Kemp develop custom exhausts for our older bikes?  I intend to get one for my VFR750, but I need to get it in good running and riding condition first.  In the meantime, I love the way this system looks!  I'm leaning toward the high mount version.  Very sexy!

Link to comment
Share on other sites

  • 1 month later...
  • Member Contributer

I got my email last night, production run Aug 7, said they system will ship that same week. Now I need to plan the install!

Link to comment
Share on other sites

  • Member Contributer
48 minutes ago, evl_twn said:

Same here, getting my 86 out of mothballs to get it ready for the Hindle install once it shows up 🙂

 

 

001.JPG

 

Tasty!!!

Link to comment
Share on other sites

  • 2 months later...
  • Member Contributer

just got email today, looks like it will be shipped very soon like this week, so stoked to see it. will now have a 92 with TBR left exit, a 97 with TBR left exit and a 86 with this hindle highmount, just need to find some TBR for my 07 RWB

Link to comment
Share on other sites

  • 1 month later...
  • Member Contributer

I received my box of parts last week, won't be able to install until spring.

Link to comment
Share on other sites

  • Member Contributer

I got mine 2 weeks ago, it will be a while before it gets installed. assembled for viewing pleasure looks very good, problem is no back purging done so inside looks like garbage. was going back and forth with them about maybe doing a system for the 6 gen, and they would get back to me within 20 minutes on facebook. asked them about the lack of back purging, and shitting looking welds, not heard back in 2 weeks. had so much hope for them too. oh well its not like it cost $1000 and took 2 years to get the product from them..... oh wait

 

overall it looks good and will be very nice with it ceramic coated and it adds power supposedly

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.