SSNOWDEN77 Posted October 31, 2017 Share Posted October 31, 2017 I have owned my 2012 VF1200 for 26 months and the vinyl cover on the seat has split in several spots in the forward area. Looking for recommendations for either a temporary repair option, replace with OEM or choose aftermarket replacement. Thanks in advance for any input. I have read that the seats on 2010 VFR1200’s were notorious for the vinyl cracking. Link to comment Share on other sites More sharing options...
andy Posted November 1, 2017 Share Posted November 1, 2017 It’s time for me to get another seat, but I just did this repair removing the stables that hold the seat cover to the pan/foam, adding some nylon netting and ShooGoo. Link to comment Share on other sites More sharing options...
Member Contributer fdbgt Posted January 21, 2018 Member Contributer Share Posted January 21, 2018 I bought a real leather seat cover on Ebay and had a local auto upholstery shop install it. No more sliding all over the place and a much better seat. Link to comment Share on other sites More sharing options...
Member Contributer EhViffer Posted January 31, 2018 Member Contributer Share Posted January 31, 2018 Never regretted sending seat pan for the 2010 to Sargent in Florida and had them recover it. Huge improvement. Link to comment Share on other sites More sharing options...
Member Contributer swimmer Posted January 31, 2018 Member Contributer Share Posted January 31, 2018 I bought a Saddlemen seat cover, specific to the VFR1200 to replace my cracked cover. Hope to install it this weekend. Link to comment Share on other sites More sharing options...
Member Contributer ReadingVFR Posted April 8, 2018 Member Contributer Share Posted April 8, 2018 On 1/31/2018 at 2:07 PM, swimmer said: I bought a Saddlemen seat cover, specific to the VFR1200 to replace my cracked cover. Hope to install it this weekend. swimmer what was your impression of the Saddlemen seat cover? Link to comment Share on other sites More sharing options...
Member Contributer swimmer Posted April 9, 2018 Member Contributer Share Posted April 9, 2018 7 hours ago, ReadingVFR said: swimmer what was your impression of the Saddlemen seat cover? Actually, its not bad. The cut and quality seems decent and I think most of the short comings were from my install. Its one of those things where at least for me, the first time was a learning experience and I'd do a better job the second time. The biggest change I would make from the instructions where they tell you to install the front and back first, I'd install the front and the press and glue the cover against the contour of the seat before attaching the rear. Mine doesn't sit flat against the seat the whole. Overall I think the product is good and how well it works out depends on the installation job. Link to comment Share on other sites More sharing options...
Member Contributer VfrJedi7 Posted May 15, 2018 Member Contributer Share Posted May 15, 2018 On 1/31/2018 at 10:43 AM, EhViffer said: Never regretted sending seat pan for the 2010 to Sargent in Florida and had them recover it. Huge improvement. Yes they are a great company with a special design for the Vfr 1200. Link to comment Share on other sites More sharing options...
Member Contributer VfrJedi7 Posted May 15, 2018 Member Contributer Share Posted May 15, 2018 My Vfr 1200 came with a Corbin seat with passenger back rest. Its nice but heavier than the stock seat. But still nice to have. Best bet is to send it to Sargent to have it customized. I would like to send my stock seat in the future to Sargent. Link to comment Share on other sites More sharing options...
gteamer Posted May 24, 2018 Share Posted May 24, 2018 I had a local shop do mine and it turned out really well! I liked the feel of the stock seat, I just needed the vinyl fixed. I just gave him some inspiration and the VFR logo and he did the rest. Cost me less than $200. I have about 1,000 miles on the seat and no issues yet. Feel free to reach out and I can get yours done, but the shipping may be expensive to Northwest Arkansas. Link to comment Share on other sites More sharing options...
Member Contributer VfrJedi7 Posted May 31, 2018 Member Contributer Share Posted May 31, 2018 Nice seat. I like the wooden gear stable set up to the left. Link to comment Share on other sites More sharing options...
GreginDenver Posted May 31, 2018 Share Posted May 31, 2018 When I re-covered the seats on both of my 5th Gen VFR800s I used these guys (here's a link to the appropriate seat cover for your 2012 VFR1200). I re-covered my '99 5th Gen's seat in the Fall of 2016 and I re-covered my '01 5th Gen's seat in the Fall of 2017, both times I ordered the product off Ebay (it's made in France). The covers were delivered faster than I expected both times. I couldn't be happier with this seat cover, great materials used, the stitching is very well done and robust, and the seat cover fit the OEM seat-pan and foam perfectly. https://www.ebay.com/itm/Honda-VFR-1200F-2010-2016-Top-Sellerie-Seat-Cover-set-Designer-black-white-/173258450592?hash=item28570226a0 On a side-note, on of my two 5th Gens came to me with an extra seat, a Corbin. I guess the Corbin seat would be great for really long distance riding days, but around town it sucked because when you come to a stop and put down one or both feet the Corbin seat is so wide it's uncomfortable between your legs. Maybe it could work as an around-town seat if you had really wide-set "breeder's hips" it wouldn't be a problem, but I'm built pretty narrow overall. Link to comment Share on other sites More sharing options...
COREmotorcycle Posted January 24, 2019 Share Posted January 24, 2019 Hi there folks. Appologies that hat this is a bit of a shameless plug but I do have an answer to all you questions. Www.Coremotorcycleseating.Co.Uk Link to comment Share on other sites More sharing options...
lshark Posted February 5, 2019 Share Posted February 5, 2019 On 1/31/2018 at 10:43 AM, EhViffer said: Never regretted sending seat pan for the 2010 to Sargent in Florida and had them recover it. Huge improvement. i'm thinking of sending my seat to Sargent ....did it change the riding position at all ?? ...i know they say it fixes the sliding forward problem , which is good , but i'm a little gun shy because i put a Corbin seat on my Interceptor and i hated it....pushed me into the tank ...made a very upright riding position .....hoping that the Sargent retains the oem ergo's .....thnx On 1/31/2018 at 10:43 AM, EhViffer said: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.