Pachinko Posted September 25, 2017 Share Posted September 25, 2017 Hi Guys I'm a new member for Melbourne, Australia I've picked up a rough and ready 94 vfr that I'm going to rc30 up Already pick up a set of replica fairing, nc30 tank and an 8 spoke rear wheel So I have a few question for some of the people that have done it before First the nc30 tank, I can kind of get it to fit with out the airbox do you run them with another airbox or just socks over the trumpets Do most people modifiy the original steel seat sub frame to accepted the rc tail or is there a better option thanks in advance Quote Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted September 26, 2017 Member Contributer Share Posted September 26, 2017 Pictures!!! Quote Link to comment Share on other sites More sharing options...
BiKenG Posted February 24, 2019 Share Posted February 24, 2019 Thread getting a bit dusty so I thought I'd try and resurrect it as I am intended to attempt the exact same conversion. Could Pachinko update us on how it all went? What tank did he use in the end etc. and from where did he obtain the replica bodywork? And as requested previously - pictures? Quote Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted February 24, 2019 Member Contributer Share Posted February 24, 2019 @Pachinko Quote Link to comment Share on other sites More sharing options...
Pachinko Posted January 6 Author Share Posted January 6 sorry didn't realise someone had an interest the fairings are fibreglass rc30 replica with custom made mounting brackets to suit rc 30 mirrors the tank is the standard tank with the top 1/3 cut off and replaced with the top of an vfr400 tank then welded and lead lined Clocks are fireblade 8 spoke wheel swap and complete custom system by megacycle in Melbourne Diablo super corsa's front and rear lots a swearing and hours put in recently registered it so it back on the road next things in the pipeline is rc30 clutch and brake master swap, tyga rearsets would love to do a single wheel nut conversion hope someone finds this interesting 3 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.