Jump to content

6th Gen Clutch Plate replacement


Ekalb

Recommended Posts

  • Member Contributer

12 N-m for the springs. What do you mean by the clutch plate cover?

Link to comment
Share on other sites

12 N-m for the springs. What do you mean by the clutch plate cover?

Thanks Terry. The cover that encloses the gears & clutch that I have to remove after draining the oil.

Sent from my SM-G930T using Tapatalk

Link to comment
Share on other sites

  • Member Contributer

I don't think there is specific torque for all those bolts; the generic fastener setting in the manual is 10 N-m for a 6mm flange head bolt. 

 

BTW, you don't have to drain the oil for a clutch plate replacement, if the bike is on the sidestand the oil level is below the opening. 

Link to comment
Share on other sites

  • Member Contributer

Measure your springs while you are in there... I also have an 02 with about 40k miles and 2 of the springs were below service limit.  Replaced with Barnetts for ~$20

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.