royboy347 Posted July 11, 2016 Share Posted July 11, 2016 hello! im new here and actually new to posting on forms completely for that matter! i search and read thru them allot. and have gotten some good info from here so i figured i would give it a shot and see if i can get some extra direction or info! i bought a 1997 vfr 750 from a friend that owns a local bike shop. it was dropped off a U-Haul truck while trying to load it and bent the tail pretty bad so it was a perfect start for what i wanted to do, i already planned on building a custom tail. im a welder fabricator for work and went to technical collage for motorcycle technology and have owned many bikes and still own all types of bike so im not new to any of this but can always use advice from people who have more knowledge on a specific bike. so some info on the bike... when i got it home first thing i did was charge the battery fresh fuel and fired it up ran great! good start, then i striped it of all of its outdated ugly plastics! haha went over the whole bike completely i mean EVERYTHING! found the forks are bent son they came off one of the clipons was cracked so i ordered risers and dirtbike bars and went that rout because that was the plan anyways. did the pair blockoff and got fid of all of that crap. and started on the tail. i started with a ducati monster seat. had to get a little creative on bending the square tubing for the tail ;) but it came out great. i then made the undertail skin and box. im now in the middle of thinning out wiring and figuring all of that out. taht brings me here. right now im planning the dash. i wanna do a minimalistic dash few led lighsts thats it. dont think im going to do any gauges. all i want is a low fuel light signal light high beam light side stand maybe... i cant figure out the low fuel light.. so this is where im stuck. i have SOOOOO many more pictures i will probably add in the morning just wanted to start it up and see if i get any responses. THANKS!!!! Link to comment Share on other sites More sharing options...
Gavmac Posted July 11, 2016 Share Posted July 11, 2016 You've posted in the "5th Gen" forum. This covers 1998-2001 VFR800. I'm guessing you'd have better responses by posting in the correct forum. Try posting here instead, http://www.vfrdiscussion.com/index.php?/forum/4-third-and-fourth-generation-vfrs/ Link to comment Share on other sites More sharing options...
royboy347 Posted July 11, 2016 Author Share Posted July 11, 2016 Oh crap ok thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.