Jump to content
swimmer

Veefour Electronic Cruise Control, Installed And Tested

Recommended Posts

1 hour ago, fotodadi said:

 

 

If only we could have a letter or 2 or 3 etched out under/above the buttons. There is space so.....just above and beneath the LEDs.

 

:ON", "MEM", "SET", "RES" that would just make everything simply AWESOME....especially on the square unit. So Prez...what do you think?

once you've used it a few times the legend would be redundant. I don't consider it a necessary expense. If it isn't 2nd nature then you shouldn't be using it.

  • Like 2

Share this post


Link to post
Share on other sites
3 hours ago, DavidField said:

once you've used it a few times the legend would be redundant. I don't consider it a necessary expense. If it isn't 2nd nature then you shouldn't be using it.

I agree Dave, if you need to look then you have bigger problems than setting your CC
Though in saying that, in keeping with standard motorcycle switches these are all labelled with little graphics which I can't recall having ever looked at except when standing next to the bike..

Share this post


Link to post
Share on other sites

I just couldn't operate the original rocker switches at all with normal gloves on, even with my lighter weight summer gloves it was hit or miss as to whether I could get it to operate. Now with the new switch it's very simple.., so easy in fact, that I set the MEM button to 22mph and use it every day in the stupid 20mph zones that have sprung up in the main thoroughfares in Edinburgh.

  • Like 1

Share this post


Link to post
Share on other sites

Just discovered (I know its taken me a long time) that the ECC is even better than that on cars. It retains BOTH memory settings even after the bike is switched off!! So for weekday riding when I go thorough 20 MPH and 30 MPH zones I don't have to reset the standard memory. The MEM button and the Resume button both retain their settings after switching off.

Share this post


Link to post
Share on other sites

More annotations

IMG_3173.JPG

  • Like 1

Share this post


Link to post
Share on other sites

Autumn sale!

My workshop will be closed in the most part of the October and probably a week or two in November.

Last orders by 24th of September and fixed prices for FULL version for everyone:

380 EU for FULL kit either F or X model.

Normal shipping charges:
15 EU - shipping within EU
20 EU - shipping to US or CAN
25 EU - shipping to AU

Even even better: only now, in this sale push-button switch free of charge!

Be sure to grab yours before it's too late :)

Share this post


Link to post
Share on other sites
On 5/24/2017 at 6:12 PM, DavidField said:

I just couldn't operate the original rocker switches at all with normal gloves on.

 

I had the same problem with my original rocker switch.  I have a new rocker switch and it's night and day.  With the old rocker I had to be very deliberate with the button presses for them to register.  With the new rocker switch I just give the rocker a poke and the input always registers.  I don't know if it's just a different lot of components or what.  I was dead set on getting the push buttons before and now I don't think I need them... however the square is the best looking IMHO.

 

@veeefour Are you ready for me to send back my old unit?

Share this post


Link to post
Share on other sites

I just uninstalled the ecc front a 2010 dct to install it on my brand new 2013 dct. Should have taken pictures as I don't remember where the black wire connects to ?

Also, the 2 plugs from ecc harness in the picture ? One connects to the oem plug and the other one ???

 

20171017_000440[1].jpg

Share this post


Link to post
Share on other sites

Are those the plugs running to the front left of the bike or running to the rear of the bike?

Share this post


Link to post
Share on other sites
4 hours ago, swimmer said:

Are those the plugs running to the front left of the bike or running to the rear of the bike?

front left of the bike

 

Share this post


Link to post
Share on other sites
20 minutes ago, Normand said:

front left of the bike

 

Got a response from Prez, simple, plug to oem connector and use the free connector for accessory quartet harness.

Share this post


Link to post
Share on other sites

A happy new year to your all!  :002:

I'm back and working full time again. 

All orders in January 5% off!

Share this post


Link to post
Share on other sites

New switch version around the corner that will have built-in LED's in push-buttons.

Some wanted a simplified version with even smaller controller - so here you go  :002:

Key features:
-ECC will always stay ON - no more ON/OFF button.
-middle MEMORY push-buton with green LED will inform that ECC is on and ready to go
-upper SET/+  push-button with red LED will illuminate when the ECC is engaged.
-lower RES/- push-button with STATUS red LED - it will indicate few things like: brake applied, clutch applied, pressed button, faulty conditions etc.

 

New switch.jpg

  • Like 1

Share this post


Link to post
Share on other sites

New switch release date: end of April/beginning of May.

We are going to take some time off for the most part of April - last orders until the end of the next week. 
For those 2 weeks left: free push-button switch upgrade for new customers.

Share this post


Link to post
Share on other sites
On October 17, 2017 at 5:59 PM, Normand said:

Got a response from Prez, simple, plug to oem connector and use the free connector for accessory quartet harness.

 

PM sent.

Share this post


Link to post
Share on other sites

Guys, I'm not checking this that often anymore. Please feel free to email me directly: veeefour.ecc@gmail.com

Share this post


Link to post
Share on other sites
1 hour ago, veeefour said:

Guys, I'm not checking this that often anymore. Please feel free to email me directly: veeefour.ecc@gmail.com

For Info:

 

I had to type the email address to get it to work... it won't just copy and paste directly.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Privacy Policy.