Jump to content

4Th Gen Hi-Lo Mount Mufflers


Dutchy

Recommended Posts

  • Member Contributer

Gerhard Thurn from Germany is now offering 

 

post-8974-0-28204800-1430249795.jpg

 

post-8974-0-96335700-1430249818.jpg

 

 

 

The muffler come with 2 mid pipes;

the exhaust bracket mounts to the passenger foot rest hanger like OEM, for when you want to attach panniers.

To the subframe which has a pre-drilled hole for this from the factory ( he one in the middle of this picture) for the hi-mount.

IMAG1567_1.jpg

You make a small incision in the under tray to put the bracket through

 

It carries an E-approval mark.

 

 

For further inquiries, contact Gerhard at:

info@thurn-motorsport.de 

 

 

Price is Eur 469 + shipping

The euro is now about on-par with the dollar.

Don't know the shipping cost Gerhard charges but if I ship a registered package from NL to the US (2-5 kilo) is is around Eur40 (5-10kg is Eur 60. So maybe add a bit for packaging.

He offers a lot more goodies for Honda's/VFRs ..  www.thurn-motorsport.de

post-8974-0-74910500-1430285438.jpg

post-8974-0-49647800-1430285440.jpg

post-8974-0-35964000-1430285967.jpg

Link to comment
Share on other sites

  • Member Contributer

It does in Europe. And Germany being very strict on noise (as douglasthecook found out) I expect it to be throaty but within common decency

Link to comment
Share on other sites

469 Euros/Dollars for a quality high right or low slip on muffler like that is not bad at all (My Staintune High right was just under 500 bucks when I bought it in 96)..... it's the shipping from Germany that might make it expensive for US VFR owners.... I wonder how much shipping would be??

Link to comment
Share on other sites

  • Member Contributer

Just drop Gerhard a note, he will know for sure.

Or find a mule to carry one beck to the US.

Link to comment
Share on other sites

Shame how the third gen gets largely ignored by exhaust manufacturers. Luckily for any 3rd gen owners out there, I managed to convince Delkevic they were worth making, so expect to see high levels for the third gen from Delkevic very soon!

Link to comment
Share on other sites

Yes! 3rd Gen!

I've been thinking along Dutchy's idea of buying a beat up OEM, just to steal the flange, then having a muffler shop bend the mid pipe for me.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.