czargee Posted April 23, 2015 Share Posted April 23, 2015 (edited) Here's my DIY license plate bracket. It does remove the plate light. And I guess I can put a smaller one later. After some searching in Home Depot, I found this. I was going to put them together like this so the angle of the plate can be adjusted. One end would attach to the bike and the other to the plate. After looking at the setup, I saw I could get by with using one bracket. So I drill holes on the plate side to mount it underneath the viffer. Then I bent the sides slightly to make flaps. Those flaps are used to mount the plate on. Then I drilled holes on the bent flaps on the bracket, and on the plate. Those other little holes on the plate were from the previous owner. Then I painted it black and bolted everything in place. Spent around $4 and used paint and spare screw I already had. Enjoy! Edited April 23, 2015 by czargee 1 Quote Link to comment Share on other sites More sharing options...
enzed_viffer Posted April 23, 2015 Share Posted April 23, 2015 Iffen I was you (which I'm not - I'm a separate species), I'd remove that piece of duct tape so you don't get a ticket [insert eye-rolling emoticon here] 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer rhoderage Posted April 23, 2015 Member Contributer Share Posted April 23, 2015 Great idea! 1 Quote Link to comment Share on other sites More sharing options...
czargee Posted April 23, 2015 Author Share Posted April 23, 2015 Iffen I was you (which I'm not - I'm a separate species), I'd remove that piece of duct tape so you don't get a ticket [insert eye-rolling emoticon here] Damn, you're right. Quote Link to comment Share on other sites More sharing options...
Member Contributer KevCarver Posted April 23, 2015 Member Contributer Share Posted April 23, 2015 Quote Link to comment Share on other sites More sharing options...
Member Contributer Switchblade Posted April 23, 2015 Member Contributer Share Posted April 23, 2015 Dam great idea !!! Quote Link to comment Share on other sites More sharing options...
Member Contributer rhoderage Posted April 24, 2015 Member Contributer Share Posted April 24, 2015 Easy solution for lights is something like this: http://www.ebay.ca/itm/Universal-2x-White-LED-Motorcycle-Motorbike-Car-License-Plate-Bolt-Light-Bulb-EC-/221660306415?hash=item339bfbdbef&vxp=mtr I have them on mine, cheap as heck and work just fine. Quote Link to comment Share on other sites More sharing options...
czargee Posted April 24, 2015 Author Share Posted April 24, 2015 Easy solution for lights is something like this: http://www.ebay.ca/itm/Universal-2x-White-LED-Motorcycle-Motorbike-Car-License-Plate-Bolt-Light-Bulb-EC-/221660306415?hash=item339bfbdbef&vxp=mtr I have them on mine, cheap as heck and work just fine. Thanks!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.