Jump to content

Another Fan Switch Conundrum


nobby01

Recommended Posts

Hi all, Soooo, I noticed recently my fan was not coming on at the prescribed temp. common problem I know, I priced up a new switch from honda spain 84euros!! same switch on ebay 5 euros! no brainer right? no no, the new switch was coming on far too early, the fan would have been permanently on , here in the summer, so in the end I splashed out on a pattern switch from wemoto.com 50 euros.

At first all good, but recently I have seen 112celcius and the fan isnt coming on, i am reluctant to use the bike as it is, obviously. but today I stuck a small flatblade screwdriver into the switch wire and bridged across to the fan switch main body. with the ignition on the fan is working.

Am i missing something? if it comes on like this, everything should be ok, right??

Any wisdom greatly appreciated!!

Link to comment
Share on other sites

  • Member Contributer

the bikes just run hot in start and stop traffic.. check your coolant level...

unplug the black wire from the fan to the thermo switch..

splice in another black wire to a switch, located at the place of your choosing.

add a ground wire from the switch :comp13:

live happy ever after. :wheel:

IMG_20140404_004922_zps2b485cd4.jpg

Link to comment
Share on other sites

At what temps should the fan come on and go off, Mine starts to run at +104C and stop running at +97C.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.