SEBSPEED Posted April 21, 2014 Share Posted April 21, 2014 Thought some of you might get a kick out of this. I took a Buell Firebolt fairing and retrofitted a couple non-Buell lights to give it a different look. Left side is 2004(maybe?) Yamaha R6 projector set, right side is a Hella driving lamp cut from a busted 2013 BMW 3 series headlight. I grafted them in by cutting plastic posts which I predrilled for self tapping screws left over from the beemer light. I made a couple small filler pieces to close up the gaps around the projector. For good measure, I also laid up a carbon fiber windscreen. I started the project yesterday morning and the fab part would have been done today if I didn't have to run off for Easter activities. 1. Parts 2. Ideas 3. More parts 4. Carbon layup 5. Always looks nice while the resin is wet... 6. Testing lights for beam pattern, to determine orientation in fairing 7. Carbon screen test fit after drilling holes 8. Half-done fillers around R6 lenses All that said, I leave you to ponder the resemblance to this astonished cat. Discuss. Link to comment Share on other sites More sharing options...
Member Contributer Switchblade Posted April 21, 2014 Member Contributer Share Posted April 21, 2014 Ah Seb walk away from the Buell. I guess for some future street fighter type VFR ? Good work as usual .. Link to comment Share on other sites More sharing options...
SEBSPEED Posted April 21, 2014 Author Share Posted April 21, 2014 What's wrong with a Buell? Stock: Link to comment Share on other sites More sharing options...
Member Contributer CasualSwede Posted April 21, 2014 Member Contributer Share Posted April 21, 2014 1. What's it going on? 2. If you didn't post that cat picture, I would've... 3. I see a bit of 2009+ Yamaha R1 in it. I like. Link to comment Share on other sites More sharing options...
Member Contributer Switchblade Posted April 21, 2014 Member Contributer Share Posted April 21, 2014 TMac break ? Link to comment Share on other sites More sharing options...
SEBSPEED Posted April 21, 2014 Author Share Posted April 21, 2014 1. What's it going on? 2. If you didn't post that cat picture, I would've... 3. I see a bit of 2009+ Yamaha R1 in it. I like. 1. A custom bike 3. I see a cross between Buell, R1, R6, and BMW S1000RR... (and a cat and a spider...) TMac break ? ? Link to comment Share on other sites More sharing options...
The Phantom Posted April 21, 2014 Share Posted April 21, 2014 That is cool!! A streetfighter needs a point of differentiation, and this is a great way to achieve that. I'd go further, and cover the single lens with yellow film... Link to comment Share on other sites More sharing options...
Member Contributer apexandy Posted April 21, 2014 Member Contributer Share Posted April 21, 2014 I like :) Link to comment Share on other sites More sharing options...
Member Contributer Duc2V4 Posted April 21, 2014 Member Contributer Share Posted April 21, 2014 The saying usually goes..."Don't quit your day job". But for Seb, "Dude, Quit your day job! You should be doing stuff like this for a living". This is some cool stuff Seb. As far as the Buell, if it was for a Buell Blast, I would have to agree with Switchblade. Heck, I think even EB would agree! (From Wikipedia) "In July 2009, prior to Buell ceasing all motorcycle production, Buell ran an ad campaign stating that the Buell Blast would no longer appear in their line-up. The ad featured a Buell Blast being destroyed in an automobile crusher. For 2010, a limited run of crushed Blast cubes was offered for sale upon request. They were available in Battle Blue, Midnight Black, and Sunfire Yellow, and were individually signed and numbered by Erik Buell." Link to comment Share on other sites More sharing options...
SEBSPEED Posted April 21, 2014 Author Share Posted April 21, 2014 I wish Duc. Link to comment Share on other sites More sharing options...
SEBSPEED Posted April 23, 2014 Author Share Posted April 23, 2014 In case anyone's interested, I used Valvoline Plio Grip for the plastic modifications. Link to comment Share on other sites More sharing options...
The Phantom Posted April 23, 2014 Share Posted April 23, 2014 I wasn't aware of that product - looks like it would be great for finishing plastic weld repairs. Link to comment Share on other sites More sharing options...
SEBSPEED Posted April 23, 2014 Author Share Posted April 23, 2014 You can use it in place of the plastic weld. Down side is, the Plio Grip costs $35. Upshot... you get a lot of use out of it. (at least I do anyway!) Link to comment Share on other sites More sharing options...
Member Contributer spinalator Posted April 26, 2014 Member Contributer Share Posted April 26, 2014 Good work Seb. Link to comment Share on other sites More sharing options...
Member Contributer paladinreed Posted September 12, 2014 Member Contributer Share Posted September 12, 2014 Real nice. I like it Link to comment Share on other sites More sharing options...
Member Contributer zoomzoom Posted September 12, 2014 Member Contributer Share Posted September 12, 2014 Very cool. It takes a certain kind of person to be able to think up stuff like what you've done here, and then be able to transform it into something real. I am always in awe of people with your kind of talent. Do we see a street fighter version of the 5th gen VFR perhaps. Or perhaps since it has three headlights, maybe it needs to adorn a Triumph?? Link to comment Share on other sites More sharing options...
MVinOZ Posted September 16, 2014 Share Posted September 16, 2014 In case anyone's interested, I used Valvoline Plio Grip for the plastic modifications. Good info, I need to do something similar on the VFR fairing to block out the headlights, good stuff! Fairing looks good too, very distinctive. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.